Melting and flowing in multiphase environment

نویسندگان

  • Ye Zhao
  • Lujin Wang
  • Feng Qiu
  • Arie E. Kaufman
  • Klaus Mueller
چکیده

This paper presents a method to simulate the melting and flowing phenomena with different materials in multiple phases. In such a multiphase environment, solid objects are melted because of heating and the melted liquid flows while interacting with the ambient air flow. Our simulation is based on a modified lattice Boltzmann method (LBM), where the fluid dynamics of the air flow and the melted liquid is modeled within a common lattice framework. Therefore, no particular front tracking methods are required for the liquid-air interface. The liquid-solid and air-solid interfaces are implemented as curved boundaries in the LBM, which can accommodate arbitrarily shaped solid objects. Heat transfer is incorporated with a finite difference discretization of a standard diffusion-advection equation simulating the temperature evolution. The temperature and body forces (gravity and surface tension) are easily applied by adopting a new version of the LBM: multiple-relaxation-time LBM (MRTLBM). The melting and flowing behavior is controlled by the heat source, the viscosity and the body forces. All the numerical computations in our method are local and parallelizable, therefore, interactive speed is achieved by hardware acceleration on the contemporary graphics hardware (GPU).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Multiphase flow and tromp curve simulation of dense medium cyclones using Computational Fluid Dynamics

Dense Medium Cyclone is a high capacity device that is widely used in coal preparation. It is simple in design but the swirling turbulent flow, the presence of medium and coal with different density and size fraction and the presence of the air-core make the flow pattern in DMCs complex. In this article the flow pattern simulation of DMC is performed with computational fluid dynamics and Fluent...

متن کامل

Pore-scale mass and reactant transport in multiphase porous media flows

Reactive processes associated with multiphase flows play a significant role in mass transport in unsaturated porous media. For example, the effect of reactions on the solid matrix can affect the formation and stability of fingering instabilities associated with the invasion of a buoyant non-wetting fluid. In this study, we focus on the formation and stability of capillary channels of a buoyant ...

متن کامل

Mineralogical, alteration and fluid inclusion studies of the mineralization index at Yeylaghe Gharachi, northwest of Ahar, NW Iran

The mineralization index of Yeylaghe Gharachi, as part of Arasbaran metallogenic belt, is located about 25 km northwest of Ahar, East-Azarbaidjan Province, NW Iran. The host rocks of this index consist of composite intrusive rocks with lithologic compositions of granite, quartz monzonite, granodiorite and diorite of Oligocene and Oligo-Miocene age. The alteration zones in this area are mainly p...

متن کامل

Errors Introduced by Multiphase Flow Correlations on Production Analysis

First and foremost, production analysis techniques require accurate rate and bottomhole pressure histories. In most cases the pressure history of the well is not measured directly at the bottomhole condition, but is calculated from surface measurements by the use of single or multiphase flow correlations. In some cases significant error is introduced through the use of these correlations. This ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Computers & Graphics

دوره 30  شماره 

صفحات  -

تاریخ انتشار 2006