Shrinky-Dink microfluidics: 3D polystyrene chips.
نویسندگان
چکیده
We present a novel approach for the ultra-rapid direct patterning of complex three-dimensional, stacked polystyrene (PS) microfluidic chips. By leveraging the inherent shrinkage properties of biaxially pre-stressed thermoplastic sheets, microfluidic channels become thinner and deeper upon heating. Design conception to fully functional chips can thus be completed within minutes.
منابع مشابه
Shrinky-Dink microfluidics: rapid generation of deep and rounded patterns.
We present a rapid and non-photolithographic approach to microfluidic pattern generation by leveraging the inherent shrinkage properties of biaxially oriented polystyrene thermoplastic sheets. This novel approach yields channels deep enough for mammalian cell assays, with demonstrated heights up to 80 microm. Moreover, we can consistently and easily achieve rounded channels, multi-height channe...
متن کاملBetter shrinkage than Shrinky-Dinks.
Polyolefins are finding increased popularity in microfluidic applications due to their attractive mechanical, processing, and optical properties. While intricate features are typically realized in these thermoplastics by hot embossing and injection molding, such fabrication approaches are expensive and slow. Here, we apply our shrink-induced approach-first demonstrated with polystyrene 'Shrinky...
متن کاملMicrofluidics for High School Chemistry Students.
We present a laboratory experiment that introduces high school chemistry students to microfluidics while teaching fundamental properties of acid-base chemistry. The procedure enables students to create microfluidic systems using nonspecialized equipment that is available in high school classrooms and reagents that are safe, inexpensive, and commercially available. The experiment is designed to ...
متن کاملRapid prototyping of microchannels with surface patterns for fabrication of polymer fibers
Microfluidic technology has provided innovative solutions to numerous problems, but the cost of designing and fabricating microfluidic channels is impeding its expansion. In this work, Shrinky-Dink thermoplastic sheets are used to create multilayered complex templates for microfluidic channels. We used inkjet and laserjet printers to raise a predetermined microchannel geometry by depositing sev...
متن کاملBead Traps in Capillary-driven Microfluidics for Fluorescence Immunoassays
Polymeric microspheres represent an important class of components for biological assays because they can be fabricated from many materials, with well-controlled diameters from nanometers to hundreds of micrometers and functionalized with biomolecules. However, the incorporation of such microspheres inside microfluidic chips remains a challenge in particular when reproducibility and mass fabrica...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Lab on a chip
دوره 8 4 شماره
صفحات -
تاریخ انتشار 2008