Eco-Friendly Natural Filler Based Epoxy Composites
نویسنده
چکیده
In this study, acrylated soybean oil (AESO) was used as modifying agent for DGEBF-type epoxy resin (ER). AESO was used as a co-matrix in 50 wt % with ER. Composites with ecofriendly natural fillers-banana bark and seashell were prepared. MNA was used as a hardener. Effect of banana peel (BP) and seashell (SSh) fillers on mechanical properties, such as tensile strength, elongation at break, and hardness of M-ERs were investigated. The structure epoxy resins (M-ERs) cured with MNA and sebacic acid (SAc) hardeners were characterized by Fourier transform infrared spectroscopy (FTIR). Tensile test results show that Young’s (elastic) modulus, tensile strength and hardness of SSh particles reinforced with M-ERs were higher than the M-ERs reinforced with banana bark. Keywords—Biobased composite, epoxy resin, mechanical properties, natural fillers
منابع مشابه
Mechanical and Thermal Properties of Epoxy Composites Containing Zirconium Oxide Impregnated Halloysite Nanotubes
Liquid epoxy resins have received much attention from both academia and the chemical industry as eco-friendly volatile organic compound (VOC)-free alternatives for applications in coatings and adhesives, especially in those used in households. Epoxy resins show high chemical resistance and high creep resistance. However, due to their brittleness and lack of thermal stability, additional fillers...
متن کاملDegradation analysis of lignocellulosic fillers infused coir epoxy composites in different environmental conditions
India has large resources of natural fibres such as Banana, Khus, Sisal, Korai grass,Talipot, Palm leaf, Coconut, Pineapple, Screwpine, Golden grass, Jute and Sabaiamong others. In the past, trade of the village folk depended on harvesting fibresgrown in their villages. Natural fibers have recently gaining attraction of researchersdue to their low cost eco-friendly and biodegradability characte...
متن کاملPhysico-Mechanical and Tribological Properties of Glass Fiber based Epoxy Hybrid Natural Composite
Polymeric materials reinforced with synthetic fibers like glass, carbon, and aramid provide advantage of high stiffness and strength to weight ratio as compared to conventional materials like wood, concrete etc. Despite of these favours modern researches are going on in the field of natural composites because of low initial cost and availability of ease. I the light of these the present experim...
متن کاملCorrelation between Mechanical Properties with Specific Wear Rate and the Coefficient of Friction of Graphite/Epoxy Composites
The correlation between the mechanical properties of Fillers/Epoxy composites and their tribological behavior was investigated. Tensile, hardness, wear, and friction tests were conducted for Neat Epoxy (NE), Graphite/Epoxy composites (GE), and Data Palm Fiber/Epoxy with or without Graphite composites (GFE and FE). The correlation was made between the tensile strength, the modulus of elasticity,...
متن کاملExperimental Study of The Mechanical Properties of Banana Fiber and Groundnut Shell Ash Reinforced Epoxy Hybrid Composite
Effect of addition of filler material to the natural fiber composite was experimentally investigated. Composites are manufactured by the conventional hand-layup method. All composites are made with a fixed banana fiber with 15% weight fraction addition of different weight fraction of (0, 3, 5, 7.5%) groundnut shell ash is added to the composite. Tensile, hardness, impact and compressive strengt...
متن کامل