Inferential Control Based on a Modified Qpls for an Industrial Fccu Fractionator
نویسنده
چکیده
A modified Quadratic Partial Least Squares (MQPLS) algorithm based on nonlinear constrained programming is proposed. Sequential Unconstrained Minimization Technique (SUMT) is employed to calculate the outer input weights and the parameters of inner relationship. It was found that MQPLS can not only explain more of the underlying variability of the data, but also has improved modelling and predictive ability. An inferential control system is implemented on the Distribute Control System (DCS) of a fluid catalytic cracking unit ( FCCU) main fractionator. A soft sensor MQPLS–based was developed to estimate solidifying point of diesel oil. The controller was established via constrained Dynamic Matrix Control (DMC) algorithm. Real time application results demonstrated the performance of the inferential control system based on MQPLS was much better than the original tray temperature control system. This resulted in a 1.0% increase in production rate, and a significant increase in profit. Copyright © 2006 IFAC
منابع مشابه
Inferential control with the aid of modified QPLS-based soft sensor for an industrial FCCU fractionator
A modified quadratic partial least squares (MQPLS) algorithm based on non-linear constrained programming is proposed, in which a sequential unconstrained minimisation technique is employed to calculate the outer input weights and the parameters of inner relationship. Other existing quadratic partial least squares (QPLS) algorithms are also reviewed and compared with the proposed MQPLS in the ap...
متن کاملNonlinear Mpc Based on Multi-model for Distillation Columns
1 [email protected] Abstract : A multi-model structure for model predictive control has been established for a petroleum distillation column through first principle analysis, and its parameters have been estimated from data generated by a rigorous model. The nonlinear multi-model has been used for state-estimation and prediction in a MPC scheme. The controller has been applied to quality ...
متن کاملApplication of Modified Multi Model Predictive Control Algorithm to Fluid Catalytic Cracking Unit
This paper presents a modified multi model predictive control algorithm for the control of riser outlet temperature and regenerator temperature for the fluid catalytic cracking unit (FCCU). The models of the fluid catalytic cracking unit are estimated using subspace identification (N4SID) algorithm. The PRBS signal is applied as an input signal to estimate the FCCU models. Since the estimated m...
متن کاملModel Predictive Inferential Control of a Distillation Column
Typical production objectives in distillation process require the delivery of products whose compositions meet certain specifications. The distillation control system, therefore, must hold product compositions as near the set points as possible in faces of upset. In this project, inferential model predictive control, that utilizes an artificial neural network estimator and model predictive cont...
متن کاملEvaluation of Nonlinear Inferential Models to Estimate the Products Quality of Industrial Distillation Process
The problem of improvement of existing approaches for evaluation of inferential models used in the advanced process control systems is considered. The method of finding the identifiability index limit, based on the physically-chemical essence of the industrial distillation process, for the inferential models containing nonlinear transformations of measured inputs is given. The problem of handli...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006