Parameter optimization by Taguchi Methods for finishing advanced ceramic balls using a novel eccentric lapping machine

The final finishing process of advanced ceramic balls used in hybrid precision bearings constitutes two thirds of the total manufacturing cost, hence the effective and economic finishing methods and processes are critical to their widespread application. A novel eccentric lapping machine is designed and manufactured, Hot Isostatically Pressed (HIPed) silicon nitride ball blanks (diameter 13.25 mm) are used to investigate the feasibility of accelerating the ball finishing process while maintaining high surface quality. Taguchi Methods are used during the first step of finishing to optimise lapping parameters, the L9 (3 4 ) Four-Parameter, Three-Level Orthogonal Array is used to design the experiment. Experimental results reveal that this novel eccentric lapping method is very promising, a material removal rate of 40 μm/hour is achievable. The optimum lapping condition is found to be high speed, high load and high paste concentration with 60 μm diamond particles. The analysis of variance (ANOVA) shows that the most significant lapping parameter is lapping load, which accounts for 50% of the total, followed by lapping speed (31%), the particle size and paste concentration parameters only account for 12% and 7% respectively. A comparison with previous lapping experiments and the mechanism of material removal are also discussed briefly.