A Simulation-Based Method of Permeability Prediction for RTM Process Simulation
نویسندگان
چکیده
Resin injection such as resin transfer molding (RTM) is commonly applied in industry for serial production of composite components. RTM process simulation enables prediction of process parameters that are essential for component and tool design. As for all simulations where material behavior is modeled, validated material properties are indispensable for realistic simulations. Currently, material properties have to be determined experimentally which is costly and time consuming. Furthermore, standardized methods for permeability testing are not yet available.
منابع مشابه
Numerical Prediction of Temperature Distribution in Transient RTM Process
Resin Transfer Molding (RTM) is a composite manufacturing process. A preformed fiber is placed in a closed mold and a viscous resin is injected into the mold. In this paper, a model is developed to predict the flow pattern, extent of reaction and temperature change during filling and curing in a thin rectangular mold. A numerical simulation is presented to predict the free surface and...
متن کاملNumerical Modeling of Mold Filling and Curing in Non-Isothermal RTM Process (RESEARCH NOTE)
Resin Transfer Molding (RTM) is a composite manufacturing process. A preformed fiber is placed in a closed mold and a viscous resin is injected into the mold. In this paper, a model is developed to predict the flow pattern, extent of reaction and temperature change during filling and curing in a thin rectangular mold. A numerical simulation is presented to predict the free surface and its inter...
متن کاملMATHEMATICAL MODELLING OF THE EFFECT OF FOAM DEGRADATION ON MOULD FILLING IN THE GREY IRON EPC PROCESS
In this investigation a new model was developed to calculate gas pressure at the melt/foam interface (Gap) resulting from foam degradation during mould filling in the Lost Foam Casting (LFC) process. Different aspects of the process, such as foam degradation, gas elimination, transient mass, heat transfer, and permeability of the refractory coating were incorporated into this model. A Computati...
متن کاملSimulation of a membrane air separation unit using industrial process simulators
Nowadays, membrane processes are widely used for high purity Nitrogen production. Separation of air by membranes is a flexible process in which the investment and operational costs are lower than for example adsorption or cryogenic processes. Such processes are based on relative permeability of air components which are transported by the pressure difference between two sides of the membrane. M...
متن کاملPrediction of Nitrogen Injection Performance in Conventional Reservoirs Using the Correlation Developed by the Incorporation of Experimental Design Techniques and Reservoir Simulation
Enhanced oil recovery using nitrogen injection is a commonly applied method for pressure maintenance in conventional reservoirs. Numerical simulations can be practiced for the prediction of a reservoir performance in the course of injection process; however, a detailed simulation might take up enormous computer processing time. In such cases, a simple statistical model may be a good approach to...
متن کامل