Metrology and Measurement Systems
نویسندگان
چکیده
A national comparison of dc resistance at 10 M and 1G level was organized by the Electromagnetic Division of National Institute of Metrological Research (INRIM, Italy) and piloted by the same Division. This comparison took place between January and April of 2008 with the participation of 8 secondary Laboratories accredited by the Italian Accreditation of Calibration Laboratories Service (SIT). The travelling package included a wirewound 10 M standard and a thick film-type 1 G standard in a wooden anti-shock container designed by INRIM. The obtained results indicate that the differences at 10 M and 1 G between each laboratory’s value and its reference value are all within the expanded relative uncertainties of these differences. © 2009 Polish Academy of Sciences. All rights reserved
منابع مشابه
Analysis of Frequency Leakage in Different Optical Paths of Nano-Metrology Systems Based on Frequency-Path Models
The drawing of frequency-path (F-P) models of optical beams is an approach for nonlinearity analysis in nano-metrology systems and sensors based on the laser interferometers. In this paper, the frequency-path models of four nano-metrology laser interferometry systems are designed, analyzed and simulated, including ...
متن کاملMetrology, Sensors and Control
This chapter focuses on metrology, sensors and controls for micromanufacturing. In general, a variety of sensors are employed in micromanufacturing. Many of them are used for metrology, and in particular dimensional metrology. Most are used on production machines to provide feedback during production. Few metrology systems for process and product control are available. The sensors and metrology...
متن کاملApproach to Development Metrological Software Test for Verification Intelligent Instrumentation
There is considered some methods of metrology testing of intelligent measurement systems. Also there is shown the necessity of simulation of components of measurement channel for investigation of the intelligent functions of the intelligent measurement systems in the accelerated time scale. Developed the metrology software test of temperature measurement channel using thermocouple. The results ...
متن کاملLean Six Sigma Quality Transformation Toolkit (LSSQTT)* LSSQTT Tool #11 Courseware Content “Basic Measurement, Geometric Relationships, Broader Data-based Issues”
1. Foundational metrology and measurement issues 2. Accurate data, total quality systems, kaizen, lean, six sigma 3. Metrology and inspection system services in quality 4. Historical background on metrology 5. Form, fit, finish and function, geometric underpinnings 6. Foundational metrological and measurement issues 7. Basic measurable features in geometric dimensioning 8. Basic principles and ...
متن کاملDigital Demodulation of Interferometric Signals
The marriage of optical sensing techniques with sophisticated digital signal processing has resulted in a myriad of practical metrology systems. Optical metrology systems offer many attractive measurement features. These systems are inherently non-contacting, nondestructive, and immune from electromagnetic interference. In addition, since light is used as the sensing probe, the measurement syst...
متن کاملDimensional metrology interoperability and standardization in manufacturing systems
a r t i c l e i n f o Keywords: Dimensional metrology Interoperability Standard development STEP DMIS Dimensional metrology is an important part of any manufacturing system. It consists of distinct components and requires a large, diverse, and interconnected knowledge base. How to pass information seamlessly with minimal cost and minimal data loss between different components of a dimensional m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009