Mpc@cb Software: a Solution for Model Predictive Control

نویسندگان

  • B. Da Silva
  • P. Dufour
  • N. Othman
  • S. Othman
  • Bruno da Silva
  • Pascal Dufour
  • Nida Othman
  • Sami Othman
چکیده

This paper deals with a reusable simulation computer code (MPC@CB). The original program was developed under Matlab for single input single output (SISO) model predictive control (MPC) for any constrained optimization problem (trajectory tracking, processing time minimization...). The control structure is an adaptation of MPC with internal model control (IMC) structure. The algorithm was applied and validated for different processes. It was adapted in this work for multiple input multiple output (MIMO) constrained systems.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Model Predictive Control of the Primary Drying Stage of a Freeze Drying of Solutions in Vials: a Application of the Mpc@cb Software (part 1)

This paper deals with the first principle model based predictive control of the primary drying stage of a freeze drying of solutions in vials. In the proposed control approach, any online control problem concerned with a constrained optimization during the primary drying stage may be stated. It is solved using a special model predictive control framework where the model is used in the controlle...

متن کامل

Optimal operation of sublimation time of the freeze drying process by predictive control: Application of the MPC@CB Software

This paper presents the application of a model based predictive control strategy for the primary stage of the freeze drying process, which has not been tackled until now. A model predictive control framework is provided to minimize the sublimation time. The problem is directly addressed for the non linear distributed parameters system that describes the dynamic of the process. The mathematical ...

متن کامل

This document

This paper deals with the control of a powder coating radiative curing process by infrared flow. It is based on a unidirectional dynamic modelling where both heat transfert and cure phenomena are accounted for within the thicknessl. The control problem is the constrained optimization of the curing cycle. This is solved using a special model predictive control framework: it is designed such that...

متن کامل

Model Predictive Control of Distributed Energy Resources with Predictive Set-Points for Grid-Connected Operation

This paper proposes an MPC - based (model predictive control) scheme to control active and reactive powers of DERs (distributed energy resources) in a grid - connected mode (either through a bus with its associated loads as a PCC (point of common coupling) or an MG (micro - grid)). DER may be a DG (distributed generation) or an ESS (energy storage system). In the proposed scheme, the set - poin...

متن کامل

A Linear Matrix Inequality (LMI) Approach to Robust Model Predictive Control (RMPC) Design in Nonlinear Uncertain Systems Subjected to Control Input Constraint

In this paper, a robust model predictive control (MPC) algorithm is addressed for nonlinear uncertain systems in presence of the control input constraint. For achieving this goal, firstly, the additive and polytopic uncertainties are formulated in the nonlinear uncertain systems. Then, the control policy can be demonstrated as a state feedback control law in order to minimize a given cost funct...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009