Electrical cross-talk in two-port resonators - the resonant silicon beam force sensor
نویسندگان
چکیده
An important design consideration in the development of two-port resonant sensors is the electrical cross-talk between the input port and the output port. The overall transfer function if(jo) of the two-port sensor is equal to the vectorial sum of a transfer function representing the mechanical behavior and a transfer function representing the electrical cross-talk. The resonant silicon beam force sensor with a piezoelectric driver and a piezoelectric detector is analyzed. Two solutions to reduce the level of cross-talk are presented. Proper adjustment of the value of relevant components in the sensor geometry and/or electrical interruption of the bottom electrode result in a cross-talk level close to the noise level for the frequency range of interest.
منابع مشابه
Photonic Information Processing on a Silicon Chip
We fabricate and demonstrate devices in silicon that leads towards the goal of implementing optical information processing on a silicon chip. To this effect, we demonstrate all-optical multi-level logic using a system of symmetric ring resonators in parallel. The device can form the basis of an on-chip optical digital to analog converter (ODAC). We also demonstrate ultra low cross talk by using...
متن کاملNonlinear Modeling and Investigating the Nonlinear Effects on Frequency Response of Silicon Bulk-mode Ring Resonator
This paper presents a nonlinear analytical model for micromechanical silicon ring resonators with bulk-mode vibrations. A distributed element model has been developed to describe the dynamic behavior of the micromechanical ring resonator. This model shows the nonlinear effects in a silicon ring resonator focusing on the effect of large amplitudes around the resonance frequency, material and ele...
متن کاملNovel Design of Optical Channel Drop Filter Based on Photonic Crystal Ring Resonators
In this paper, a new design of optical channel drop filter based on two- dimensional photonic crystal ring resonators with triangular lattice is proposed. The rods of this structure is silicon with the refractive index 3.46 and the surrounding environment is air with the refractive index of 1.The widest photonic band gap obtained is for filling ratio of r/a = 0.2. The filter’s transmission spec...
متن کاملEffect of the Interparticle Interactions on Adsorption-Induced Frequency Shift of Nano-beam-Based Nanoscale Mass-Sensors: A Theoretical Study
It is well-known that the Interparticle interactions between adsorbates and surface of an adsorbent can affect the surface morphology. One of the consequences of this issue is that the resonant frequency of a nanoscale resonator can be changed due to adsorption. In this study we have chosen a cantilever-based nanoscale mass-sensor with a single nanoparticle at its tip. Using the classical...
متن کاملUnderstanding Dissipation in Nanostring Resonant Sensors
We have used optical drive and detection to study dissipation in silicon nitride beam resonators. We are able to tune resonant frequency as well as quality factor in a given nanostring resonator by several hundred percent by tuning the stress in real time, providing a unique look into the sources of dissipation for this class of nanoresonator. A record room temperature quality factor of 390,000...
متن کامل