Identification of the iron oxidation state and coordination geometry in iron oxide- and zeolite-based catalysts using pre-edge XAS analysis.
نویسندگان
چکیده
Analysis of the oxidation state and coordination geometry using pre-edge analysis is attractive for heterogeneous catalysis and materials science, especially for in situ and time-resolved studies or highly diluted systems. In the present study, focus is laid on iron-based catalysts. First a systematic investigation of the pre-edge region of the Fe K-edge using staurolite, FePO4, FeO and α-Fe2O3 as reference compounds for tetrahedral Fe(2+), tetrahedral Fe(3+), octahedral Fe(2+) and octahedral Fe(3+), respectively, is reported. In particular, high-resolution and conventional X-ray absorption spectra are compared, considering that in heterogeneous catalysis and material science a compromise between high-quality spectroscopic data acquisition and simultaneous analysis of functional properties is required. Results, which were obtained from reference spectra acquired with different resolution and quality, demonstrate that this analysis is also applicable to conventionally recorded pre-edge data. For this purpose, subtraction of the edge onset is preferentially carried out using an arctangent and a first-degree polynomial, independent of the resolution and quality of the data. For both standard and high-resolution data, multiplet analysis of pre-edge features has limitations due to weak transitions that cannot be identified. On the other hand, an arbitrary empirical peak fitting assists the analysis in that non-local transitions can be isolated. The analysis of the oxidation state and coordination geometry of the Fe sites using a variogram-based method is shown to be effective for standard-resolution data and leads to the same results as for high-resolution spectra. This method, validated by analysing spectra of reference compounds and their well defined mixtures, is finally applied to track structural changes in a 1% Fe/Al2O3 and a 0.5% Fe/BEA zeolite catalyst during reduction in 5% H2/He. The results, hardly accessible by other techniques, show that Fe(3+) is transformed into Fe(2+), while the local Fe-O coordination number of 4-5 is maintained, suggesting that the reduction involves a rearrangement of the oxygen neighbours rather than their removal. In conclusion, the variogram-based analysis of Fe K-edge spectra proves to be very useful in catalysis research.
منابع مشابه
Mössbauer and Magnetic Studies of Iron-Zeolite and Iron-Cobalt Zeolite Catalysts Used in Synthesis Gas Conversion
Medium-pore (diameter ~ 6A) zeolites such as ZSM-5 and silicalite impregnated with Group VIII metals provide selective catalytic pathways for the conversion of synthesis gas to gasoline or olefins. Mössbauer and magnetic studies on these catalysts containing iron or iron plus cobalt are reported. The zeolites were impregnated with metal nitrate solutions, reduced, and carbided to yield showed F...
متن کاملFischer-Tropsch Synthesis of Hydrocarbons Using Iron-Mordenite Catalysts
Fischer-tropsch catalysts with high activity and selectivity for olefins were produced using mordenite type SiO2/Al2O3= 12, 20, 28, 62 zeolite supported iron carbonyl compounds and were characterized by X-ray powder diffraction. The adsorptionof volatile Fe(CO)5 on the support surface was carried out under vacuum at room temperature. Reduction les...
متن کاملSulfur K-edge XAS and DFT calculations on nitrile hydratase: geometric and electronic structure of the non-heme iron active site.
The geometric and electronic structure of the active site of the non-heme iron enzyme nitrile hydratase (NHase) is studied using sulfur K-edge XAS and DFT calculations. Using thiolate (RS(-))-, sulfenate (RSO(-))-, and sulfinate (RSO(2)(-))-ligated model complexes to provide benchmark spectral parameters, the results show that the S K-edge XAS is sensitive to the oxidation state of S-containing...
متن کاملOptimization of reaction conditions and effect of catalyst type on product distribution in Cyclooctene oxidation
Oxidation of cyclooctene was studied in presence aqueous hydrogen peroxide (30%, v/v) over nano iron oxide. The catalyst prepared by microemulsion method and characterized using various techniques including XRD, TEM and BET techniques for evaluating phase, structure and morphology and surface area. In this study, we investigated the effects of varying the catalyst content, reaction temperature,...
متن کاملSimultaneous surface and bulk sensitive XAS measurements of magnetic particle clusters
Magnetic iron oxide nanoparticle clusters (mnpc) coated with organic stabilizers were investigated using scanning transmission x-ray microscopy (STXM). Simultaneous surface and bulk sensitive Fe L3 edge absorption spectra, obtained using a photomultiplier tube and a channeltron, were used to detect subtle changes in the oxidation state in the surface and bulk of Iron Oxide mnpc. The effectivene...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of synchrotron radiation
دوره 22 2 شماره
صفحات -
تاریخ انتشار 2015