Analysis of Flux-Base Fins for Estimation of Heat Transfer Coefficient
نویسندگان
چکیده
Exact solutions are given for the transient temperature in flux-base fins with the method of Green’s functions (GF) in the form of infinite series for three different tip conditions. The speed of convergence is improved by replacing the steady part by a closed-form steady solution. For the insulated-tip case, a quasi-steady solution is presented. Numerical values are presented and the conditions under which the quasi-steady solution is accurate are determined. An experimental example is given for estimation of the heat transfer coefficient (HTC) on a non-rotating roller bearing, in which the outer bearing race is treated as a transient fin.
منابع مشابه
Numerical investigation of heat transfer in a sintered porous fin in a channel flow with the aim of material determination
Extended surfaces are one of the most important approaches to increase the heat transfer rate. According to the Fourier law, the heat transfer increases by increasing the contact surface of body and fluid. In this study, the effect of heat transfer has been investigated on two sets of engineered porous fins, in which the balls with different materials are sintered together. The fluid flow throu...
متن کاملVariation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity
In this study, thermal performance across straight convecting- radiating fin with temperature dependent thermal conductivity is considered. The variation of parameters (VPM) is adopted to analyze the nonlinear higher order differential equations arising due to thermal conductivity and heat transfer coefficient on temperature distribution. Pertinent parameters such as thermo geometric and radiat...
متن کاملNelder-Mead algorithm optimization and Galerkin’s method thermal performance analysis of circular porous fins with various profiles in fully wet conditions
The main objective of this research is to analyze optimization and the thermal performance of circular porous fins with four different profiles, rectangular, convex, triangular and concave under fully wet conditions. In this research, a linear model was used for the relationship between humidity and temperature. Also, modeling is assumed one-dimensional and the temperature changes only in the d...
متن کاملConvective Heat Transfer of Oil Based Nanofluid Flow Inside a Circular Tube
Abstract An empirical investigation was carried out to study convective heat transfer of nanofluid flow inside an inclined copper tube under uniform heat flux condition. Required data are acquired for laminar and hydrodynamically fully developed flow inside round tube. The stable CuO-base oil nanofluid with different nanoparticle weight fractions of 0.5%, 1% and 2% was produced by means of ul...
متن کاملCuO/water Nanofluid Convective Heat Transfer Through Square Duct Under Uniform Heat Flux
Sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. But square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...
متن کامل