Design of Normal Force Control System for a Pin-on-Disk Tribometer including Active and Passive Suppression of Vertical Vibrations
نویسندگان
چکیده
This paper presents the design of a computer-controlled pin-on-disk tribometer for friction characterization of various friction sliding pairs. The tribometer setup comprises two high-bandwidth servomotors for the control of the rotating disk and the normal load-related spindle drive, as well as a high-precision tri-axial piezoelectric force sensor for normal and tangential forces measurement. Since the spindle drive system is characterized by notable compliance effects, the normal force cascade control system is designed with the aim of vertical vibrations active damping. In order to compensate for the unevenness of the rotating disk surface and associated high-level perturbations in the specimen normal force, the normal force control system is extended with a feedforward compensator of the disk unevenness disturbance, and a dedicated leaf spring suspension system is designed. The effectiveness of the proposed system of vertical vibrations damping is verified experimentally.
منابع مشابه
Optimized Fuzzy Logic for Nonlinear Vibration Control of Aircraft Semi-active Shock Absorber with Input Constraint (TECHNICAL NOTE)
Landing impact and runway unevenness have proximate consequence on performance of landing gear system and conduce to discomfort of passengers and reduction of the pilot’s capability to control aircraft. Finally, vibrations caused by them result in structure fatigue. Fuzzy logic controller is used frequently in different applications because of simplicity in design and implementation. In the pre...
متن کاملA Simple Approach for Determination of Actuator and Sensor Locations in Smart Structures Subjected To the Dynamic Loads
The present work demonstrates the successful application of a simple active vibration control procedure based on structural dynamics. Based on mathematical and structural dynamics’ theories, the appropriate locations of sensor and actuator locations of the smart structure are predicted. Also, the optimum value of actuator force which controls the structural vibrations as quickly as it is possib...
متن کاملNumerical Survey of Vibrational Model for Third Aircraft based on HR Suspension System Actuator Using Two Bee Algorithm Objective Functions
This research explains airplane model with two vertical vibrations for airframe and landing gear system. The purpose of this work is to advance vibrational model for study of adjustable vibration absorber and to plan Proportional-Integration-Derivative approach for adapting semi active control force. The coefficients of this method are modified as stated by Bee multiobjective optimization using...
متن کاملVibration control of an automotive engine using active mounts
In this research, vibration control of national engine (EF7) using active mounts is studied for two different mounting layouts. The first layout is based on the current engine mounting of national engine (system of three passive mounts), but the hydraulic mount is substituted by an active mount. The other mounting layout contains 4 mounts, 2 of which are active ones and the others are passive m...
متن کاملHigh-temperature High-speed Tribometer with Complex Motion
Complex motions and wide variations in relative surface velocities are likely to be experienced in mechanical systems such as an engine (e.g., piston rings, wrist pins and crankshaft main bearings in a piston type engine). Currently available tribometers use simple motions and often a constant speed. A new tribometer is designed with the capability of three types of motions: (1) unidirectional ...
متن کامل