Superconducting Accelerator Magnets: a Review of Their Design and Training*
نویسنده
چکیده
This paper reviews the basic mechanical designs of most of the superconducting magnets developed for high energy hadron accelerators. The training performance of these magnets is compared with an instability factor defined by the square of the current density in the stabilizing copper divided by the surface-to-volume ratio of the strands. A good correlation is observed.
منابع مشابه
A Common Coil Design for High Field 2-in-1 Accelerator Magnets
A common coil design concept for 2-in-1 superconducting accelerator magnets is presented. It practically eliminates the major problems in the ends of high field magnets built with either high temperature superconductors (HTS) or conventional superconductors. Racetrack coils, consisting of rectangular blocks built with either superconducting tapes or cables, are common to both apertures with eac...
متن کاملSis100 Fast Ramped Magnets and Their Cryopump Functionality for the Operation with High Intensity Intermediate Charge State Heavy Ions
The FAIR SIS100 accelerator at GSI Darmstadt will be equipped with fast ramped superconducting magnets. The high current Uranium beam modes with intermediate charge states, require ultra low vacuum pressures which can be achieved in long term operation only by cold beam pipes acting as a cryopump with stable temperatures well below 15 K for all operating cycles. The straightforward layout for r...
متن کاملState-of-the Art Superconducting Accelerator Magnets
With the LHC the technology of NbTi-based accelerator magnets has been pushed to the limit. By operating in superfluid helium, magnetic fields in excess of 10 T have been reached in various one meter-long model magnets while full scale magnets, 15 meter-long dipoles, have demonstrated possibility of safe operation in the 8.3–9 tesla range, with the necessary, very tight, field accuracy. The pap...
متن کاملCBN 95 - 18 1 Interaction Region Optimization for CESR Phase III
The space around the interaction region is some of the most highly utilized due to its importance to both CESR and CLEO. It is therefore desirable to try to optimize the design of the components in that space to a greater extent than is usually done for accelerator systems. In this paper I describe an optimization of the CESR portion of interaction region I developed and used to generate the sp...
متن کاملPost-LHC Accelerator Magnets
The design and practicality of future accelerators, such as hadron colliders and neutrino factories being considered to supercede the LHC, will depend greatly on the choice of superconducting magnets. Various possibilities will be reviewed and discussed, taking into account recent progress and projected improvements in magnet design and conductor development along with the recommendations from ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1998