Numerical Investigation of Single Stage of an Axial Flow Compressor for Effects of Blade Aspect Ratio

In present work, a compressor configuration is taken from literature which will be studied for aspect ratio (ratio between length of blade to chord length) influence over performance. Performance in the sense is pressure ratio of compressor. The aspect ratio of the blade is an important parameter and has a strong influence on the performance of axial flow compressor. There are so many literatures available on influence of design parameters of axial flow compressor over its performance. Few literatures only are available for effects of aspect ratio of blade over performance of compressor. A study is proposed to be carried out to verify the effect of aspect ratio on the performance of single stage subsonic compressor through ANSYS-CFX software. The analysis will be carried out for the constant tip diameter of the compressor rotor blade having an aspect ratio 1, 2 and 3 and to obtain the pressure loss and flow parameters of the compressor stage. Further increase in aspect ratio will lead to structural problem of compressor. Therefore, there will be optimum aspect ratio between 2 and 3. Simulation will be conducted to aspect ratios of 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8 and 2.9 to find optimum ratio using ANSYS-CFX commercial CFD software.