Improved Dispersion of Carbon Nanotubes in Polymers at High Concentrations
نویسندگان
چکیده
The polymer nanocomposite used in this work comprises elastomer poly(dimethylsiloxane) (PDMS) as a polymer matrix and multi-walled carbon nanotubes (MWCNTs) as a conductive nanofiller. To achieve uniform distribution of carbon nanotubes within the polymer, an optimized dispersion process was developed, featuring a strong organic solvent-chloroform, which dissolved PDMS base polymer easily and allowed high quality dispersion of MWCNTs. At concentrations as high as 9 wt.%, MWCNTs were dispersed uniformly through the polymer matrix, which presented a major improvement over prior techniques. The dispersion procedure was optimized via extended experimentation, which is discussed in detail.
منابع مشابه
Combination of two dispersants as a valuable strategy to prepare improved poly ( vinyl alcohol ) / carbon nanotube composites
We here present an effective strategy to prepare enhanced composites using poly(vinyl alcohol) (PVA) and multiwalled carbon nanotubes (MWCNT). It contains two essential steps. First, the elaboration of homogeneous aqueous MWCNT dispersions and the selection of the most effective dispersing agent. In a sequential dispersion protocol for seven common dispersants, including surfactants and polymer...
متن کاملThe role of surfactants in dispersion of carbon nanotubes.
The discovery of carbon nanotubes offers exciting opportunities for the development of novel high property materials. Disaggregation and uniform dispersion are critical challenges that must be met to successfully produce such high property materials, since carbon nanotubes tend to self-associate into micro-scale aggregates. This results in products with inferior mechanical and electric performa...
متن کاملSintering Process and Mechanical Property of MWCNTs/HDPE Bulk Composite
Studies have proved that increasing polymer matrices by carbon nanotubes to form structural reinforcement and electrical conductivity have significantly improved mechanical and electrical properties at very low carbon nanotubes loading. In other words, increasing polymer matrices by carbon nanotubes to form structural reinforcement can reduce friction coefficient and enhance anti-wear property....
متن کاملPolymer-Assisted Isolation of Single Wall Carbon Nanotubes in Organic Solvents for Optical-Quality Nanotube-Polymer Composites
Dispersions of isolated single wall carbon nanotubes (SWNTs) in pure organic solvents can usually be prepared only at low concentrations (∼0.01-0.02 g/L). Here, we use poly(vinylpyrrolidone) as a dispersant for unfunctionalized SWNTs in N-methyl-2-pyrrolidone and achieve concentrations of up to ∼0.16 g/L. Such dispersions remain stable by visual inspection for at least 1 year after preparation....
متن کاملElectroconductive Pet/swnt Films by Solution Casting
The market for electrically conductive polymers is rapidly growing, and an emerging pathway for attaining these materials is via polymer-carbon nanotube (CNT) nanocomposites, because of the superior properties of CNTs. Due to their excellent electrical properties and anisotropic magnetic susceptibility, we expect CNTs could be easily aligned to maximize their effectiveness in imparting electric...
متن کامل