Single-electron transistor made of multiwalled carbon nanotube using scanning probe manipulation
نویسندگان
چکیده
Please cite the original version: Roschier, Leif & Penttilä, Jari & Martin, Michel & Hakonen, Pertti J. & Paalanen, Mikko & Tapper, Unto & Kauppinen, Esko I. & Journet, Catherine & Bernier, Patrick. 1999. Single-electron transistor made of multiwalled carbon nanotube using scanning probe manipulation. Applied Physics Letters. Volume 75, Issue 5. 728-730. ISSN 0003-6951 (printed). DOI: 10.1063/1.124495.
منابع مشابه
Multiwalled Carbon Nanotubes as Single Electron Transistors
Single electron transistors (SET) are fabricated from multiwalled carbon nanotubes (MWNT) by manipulation with an atomic force microscope. The devices consist of either a single MWNT with Au contacts at the ends or of two crossing tubes. In the latter device, the lower nanotube acted as the central island of a single electron transistor while the upper one functioned as a gate electrode. Coulom...
متن کاملNanomanipulation and Nanoassembly of Carbon Nanotubes Inside Electron Microscopes
We report nanomanipulation and nanoassembly of carbon nanotubes (CNTs) through nanorobotic manipulation inside electron microscopes. A hybrid nanorobotic manipulation system, which is integrated with a nanorobotic manipulator inside a transmission electron microscope (TEM) and nanorobotic manipulators inside a scanning electron microscope (SEM), is used. The elasticity of a multiwalled CNT (MWN...
متن کاملScanning Probe Techniques for Engineering Nanoelectronic Devices
microscopy-based techniques is enabling new ways to build and investigate nanoscale electronic devices. Here we review several advanced techniques to characterize and manipulate nanoelectronic devices using an atomic force microscope (AFM). Starting from a carbon nanotube (CNT) network device that is fabricated by conventional photolithography (micron-scale resolution) individual carbon nanotub...
متن کاملSelf-heating effect modeling of a carbon nanotube-based fieldeffect transistor (CNTFET)
We present the design and simulation of a single-walled carbon nanotube(SWCNT)-based field-effect transistor (FET) using Silvaco TCAD. In this paper, theself-heating effect modeling of the CNT MOSFET structure is performed and comparedwith conventional MOSFET structure having same channel length. The numericalresults are presented to show the self-heating effect on the I...
متن کاملCarbon nanotube atomic force microscopy tips: direct growth by chemical vapor deposition and application to high-resolution imaging.
Carbon nanotubes are potentially ideal atomic force microscopy probes because they can have diameters as small as one nanometer, have robust mechanical properties, and can be specifically functionalized with chemical and biological probes at the tip ends. This communication describes methods for the direct growth of carbon nanotube tips by chemical vapor deposition (CVD) using ethylene and iron...
متن کامل