Contact Pressure Level Indication Using Stepped Output Tactile Sensors
نویسندگان
چکیده
In this article, we report on a novel diaphragm-type tactile pressure sensor that produces stepwise output currents depending on varying low contact pressures. When contact pressures are applied to the stepped output tactile sensor (SOTS), the sensor's suspended diaphragm makes contact with the substrate, which completes a circuit by connecting resistive current paths. Then the contact area, and therefore the number of current paths, would determine the stepped output current produced. This mechanism allows SOTS to have high signal-to-noise ratio (>20 dB) in the 3-500 Hz frequency range at contact pressures below 15 kPa. Moreover, since the sensor's operation does not depend on a material's pressure-dependent electrical properties, the SOTS is able to demonstrate high reproducibility and reliability. By forming a 4 × 4 array of SOTS with a surface bump structure, we demonstrated shear sensing as well as surface (1 × 1 cm²) pressure mapping capabilities.
منابع مشابه
Design of High Sensitivity and Linearity Microelectromechanical Systems Capacitive Tire Pressure Sensor using Stepped Membrane
This paper is focused on a novel design of stepped diaphragm for MEMS capacitive pressure sensor used in tire pressure monitoring system. The structure of sensor diaphragm plays a key role for determining the sensitivity of the sensor and the non-linearity of the output.First the structures of two capacitive pressure sensors with clamped square flatdiaphragms, with different thicknesses are inv...
متن کامل23.3: Tactile Sensor Based on Piezoelectric Resonance
We discuss here about the realization of tactile sensor based on the principle of change in piezoelectric resonance frequency with the applied pressure. An array of electrodes has been adopted on either side of the PZT material to have independent resonators. The common areas sandwiched between the electrodes and excitable at resonance frequency of the PZT material are used to form the sensitiv...
متن کاملModeling of soft fingertip for object manipulation using tactile sensing
Abstract In this paper, we will propose a simple contact model of a soft fingertip based on geometrical analysis and statics of the fingertip. First, we introduce a virtual spring system to the soft fingertip corresponding to one and twodimensional contact between a planar object and a soft fingertip. Second, we describe pressure distribution, and estimate that equation by simulating and measur...
متن کاملBinary Image Coding Algorithm Using Tactile Data Information
This paper describes the formulation and design principles of operation of a pneumatic proximity-to-tactile sensing device for automated recognition of objects within flexible manufacturing environments. This sensing device utilises a densely packed line array of piezoresistive pressure sensors, providing continuous variable output. The sensing head or plane of the device incorporates a corresp...
متن کاملDesign and Modeling of a New Type of Tactile Sensor Based on the Deformation of an Elastic Membrane
This paper presents the design and modeling of a flexible tactile sensor, capable of detecting the 2D surface texture image, contact-force estimation and stiffness of the sensed object. The sensor is made of polymer materials. It consists of a cylindrical chamber for pneumatic actuation and a membrane with a mesa structure. The inner radius of the cylindrical chamber is 2cm and its outer radius...
متن کامل