A New Biasing Technique for the MOS Transistor
نویسنده
چکیده
This paper describes a new biasing technique for the MOS transistor. The MOS is biased by a Gate-to-Bulk voltage VGB. The value of VGB can be chosen according to the level of inversion required, strong or weak. The input signal, current or voltage can be fed from either the drain or the source terminal. The technique can be sued in the implementation of logarithmic and antilogarithmic functions with microampere current range. This in turn will enhance the speed of the device in this mode of operation compared to the traditional weak inversion biasing. The new approach was verified by simulation using HSPICE level 47 in 0.8um CMOS process. Key-Words: Biasing Weak inversion Strong inversion Logarithmic Antilogarithmic
منابع مشابه
Gate structural engineering of MOS-like junctionless Carbon nanotube field effect transistor (MOS-like J-CNTFET)
In this article, a new structure is presented for MOS (Metal Oxide Semiconductor)-like junctionless carbon nanotube field effect transistor (MOS-like J-CNTFET), in which dual material gate with different work-functions are used. In the aforementioned structure, the size of the gates near the source and the drain are 14 and 6 nm, respectively, and the work-functions are equal and 0.5 eV less tha...
متن کاملGate structural engineering of MOS-like junctionless Carbon nanotube field effect transistor (MOS-like J-CNTFET)
In this article, a new structure is presented for MOS (Metal Oxide Semiconductor)-like junctionless carbon nanotube field effect transistor (MOS-like J-CNTFET), in which dual material gate with different work-functions are used. In the aforementioned structure, the size of the gates near the source and the drain are 14 and 6 nm, respectively, and the work-functions are equal and 0.5 eV less tha...
متن کاملReduction of 1/f Noise in MOSFETs by Switched Bias Techniques
Switched Biasing is a new a technique for reducing the 1/f noise in MOSFETS. Conventional techniques, such as chopping or correlated double sampling, reduce the effect of 1/f noise in electronic circuits, whereas the Switched Biasing technique reduces the 1/f noise itself. It exploits an intriguing physical effect: cycling a MOS transistor from strong inversion to accumulation reduces its 1/f n...
متن کامل“ Switched Biasing ” reduces both MOSFET 1 / f Noise and Power Consumption
“Switched Biasing” is proposed as a new circuit technique that exploits an intriguing physical effect: cycling a MOS transistor between strong inversion and accumulation reduces its intrinsic 1/f noise. The technique is implemented in a 0.8μm CMOS sawtooth oscillator by periodically off-switching of the bias currents during time intervals that they are not contributing to the circuit operation....
متن کاملReduction of 1/f Noise in MOSFETs
Switched Biasing is presented as a technique for reducing the 1/f noise in MOSFETS. It exploits an intriguing physical effect: cycling a MOS transistor from strong inversion to accumulation reduces its 1/f noise!! The history of the discovery of the effect and the main experimental results obtained so far will be reviewed. Keywords—1/f noise, noise reduction, CMOS, oscillators, phase noise.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006