High-temperature Experimental Characterisation of Xn40f for Life Prediction of Spf Tools
نویسندگان
چکیده
This paper describes high temperature cyclic elastic-plastic testing of XN40F material for application to the life prediction of superplastic forming (SPF) tools. Cyclic plasticity material constitutive constants are identified from the high temperature tests across the range of 20C to 900C for representative predicted die conditions. These material constants are implemented within a transient, elastic-plastic-creep, thermo-mechanical analysis method for the die to furnish stress-strain-temperature cyclic data for creep-fatigue life prediction. A simulative thermo-mechanical fatigue (TMF) test, designed to represent the temperature and stress-strain cycling associated with the most damaging phase of the die cycle is presented and shown to give lives consistent with the predicted die lives.
منابع مشابه
Assessment of different methods for fatigue life prediction of steel in rotating bending and axial loading
Generally, fatigue failure in an element happens at the notch on a surface where the stress level rises because of the stress concentration effect. The present paper investigates the effect of a notch on the fatigue life of the HSLA100 (high strength low alloy) steel which is widely applicable in the marine industry. Tensile test was conducted on specimens and mechanical properties were obtain...
متن کاملDevelopment of Lifetime Prediction Model of Lithium-Ion Battery Based on Minimizing Prediction Errors of Cycling and Operational Time Degradation Using Genetic Algorithm
Accurate lifetime prediction of lithium-ion batteries is a great challenge for the researchers and engineers involved in battery applications in electric vehicles and satellites. In this study, a semi-empirical model is introduced to predict the capacity loss of lithium-ion batteries as a function of charge and discharge cycles, operational time, and temperature. The model parameters are obtai...
متن کاملPrediction of methanol loss by hydrocarbon gas phase in hydrate inhibition unit by back propagation neural networks
Gas hydrate often occurs in natural gas pipelines and process equipment at high pressure and low temperature. Methanol as a hydrate inhibitor injects to the potential hydrate systems and then recovers from the gas phase and re-injects to the system. Since methanol loss imposes an extra cost on the gas processing plants, designing a process for its reduction is necessary. In this study, an accur...
متن کاملPartial Purification and Characterisation of Polyphenol Oxidase from Tomatoes (Solanum Lycopersicum)
Polyphenol oxidase (PPO) from tomatoes was extracted and partially purified through (NH4)2SO4 precipitation, dialysis and ion exchange chromatography. The activity of polyphenol oxidase was investigated in solanum lycopersicum. Spectrophotometric method was used to assay the enzyme activity and the kinetic constants - maximum enzyme velocity (Vmax) and Michealis - Menten constant (Km). Of the ...
متن کاملPartial Purification and Characterisation of Polyphenol Oxidase from Tomatoes (Solanum Lycopersicum)
Polyphenol oxidase (PPO) from tomatoes was extracted and partially purified through (NH4)2SO4 precipitation, dialysis and ion exchange chromatography. The activity of polyphenol oxidase was investigated in solanum lycopersicum. Spectrophotometric method was used to assay the enzyme activity and the kinetic constants - maximum enzyme velocity (Vmax) and Michealis - Menten constant (Km). Of the ...
متن کامل