Biomechanical comparison of a novel transoral atlantoaxial anchored cage with established fixation technique - a finite element analysis

نویسندگان

  • Bao-cheng Zhang
  • Hai-bo Liu
  • Xian-hua Cai
  • Zhi-hua Wang
  • Feng Xu
  • Hui Kang
  • Ran Ding
  • Xiao-qing Luo
چکیده

BACKGROUND The transoral atlantoaxial reduction plate (TARP) fixation has been introduced to achieve reduction, decompression, fixation and fusion of C1-C2 through a transoral-only approach. However, it may also be associated with potential disadvantages, including dysphagia and load shielding of the bone graft. To prevent potential disadvantages related to TARP fixation, a novel transoral atlantoaxial fusion cage with integrated plate (Cage + Plate) device for stabilization of the C1-C2 segment is designed. The aims of the present study were to compare the biomechanical differences between Cage + Plate device and Cage + TARP device for the treatment of basilar invagination (BI) with irreducible atlantoaxial dislocation (IAAD). METHODS A detailed, nonlinear finite element model (FEM) of the intact upper cervical spine had been developed and validated. Then a FEM of an unstable BI model treated with Cage + Plate fixation, was compared to that with Cage + TARP fixation. All models were subjected to vertical load with pure moments in flexion, extension, lateral bending and axial rotation. Range of motion (ROM) of C1-C2 segment and maximum von Mises Stress of the C2 endplate and bone graft were quantified for the two devices. RESULTS Both devices significantly reduced ROM compared with the intact state. In comparison with the Cage + Plate model, the Cage + TARP model reduced the ROM by 82.5 %, 46.2 %, 10.0 % and 74.3 % in flexion, extension, lateral bending, and axial rotation. The Cage + Plate model showed a higher increase stresses on C2 endplate and bone graft than the Cage + TARP model in all motions. CONCLUSIONS Our results indicate that the novel Cage + Plate device may provide lower biomechanical stability than the Cage + TARP device in flexion, extension, and axial rotation, however, it may reduce stress shielding of the bone graft for successful fusion and minimize the risk of postoperative dysphagia. Clinical trials are now required to validate the reproducibility and advantages of our findings using this anchored cage for the treatment of BI with IAAD.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Biomechanical comparison of a new stand-alone anterior lumbar interbody fusion cage with established fixation techniques – a three-dimensional finite element analysis

BACKGROUND Initial promise of a stand-alone interbody fusion cage to treat chronic back pain and restore disc height has not been realized. In some instances, a posterior spinal fixation has been used to enhance stability and increase fusion rate. In this manuscript, a new stand-alone cage is compared with conventional fixation methods based on the finite element analysis, with a focus on inves...

متن کامل

Biomechanical evaluation of a novel integrated artificial axis

Various modified instruments are used for the anterior reconstruction of the tumor lesion affecting the second cervical vertebra, but there have been no reports regarding individual integrated artificial axis (IAA) prosthesis fabricated by selective laser melting. In the present work, a new type of IAA prosthesis has been designed with a 3-dimensional (3D) finite element model of normal occiput...

متن کامل

Compression-distraction reduction surgical verification and optimization to treat the basilar invagination and atlantoaxial dislocation: a finite element analysis

BACKGROUND Basilar invagination (BI) combined with atlantoaxial dislocation (AAD) leads to foramen magnum stenosis and medullary spinal cord compression, causing nerve dysfunction. The purpose of the surgery is to remove the bony compression at brainstem ventral side and fix the unstable spinal segment and make it fused stably. Occipital cervical internal fixation system that simultaneously red...

متن کامل

Transoral approach for revision surgery of os odontoideum with atlantoaxial dislocation.

Revision surgery for os odontoideum with irreducible atlantoaxial dislocation with a transoral approach is not commonly seen. Typically, management of this type of atlantoaxial dislocation is through posterior fixation and fusion or transoral decompression and posterior fusion. This report describes revision surgery in a patient with os odontoideum who was treated with a transoral approach. A 5...

متن کامل

Biomechanical Comparison Between Bashti Bone Plug Technique and Biodegradable Screw for Fixation of Grafts in Ligament surgery

  Background: Ligament reconstruction is a common procedure in orthopedic surgery. Although several popular techniques are currently in use, new methods are proposed for secure fixation of the tendon graft into the bone tunnel. Purposes: We sought to introduce our new technique of Bashti bone plug for fixation of soft tissue graft in anterior cruciate ligament (ACL) reconstruction and to compar...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 16  شماره 

صفحات  -

تاریخ انتشار 2015