Implications of Polishing Techniques in Quantitative X-Ray Microanalysis
نویسندگان
چکیده
Specimen preparation using abrasives results in surface and subsurface mechanical (stresses, strains), geometrical (roughness), chemical (contaminants, reaction products) and physical modifications (structure, texture, lattice defects). The mechanisms involved in polishing with abrasives are presented to illustrate the effects of surface topography, surface and subsurface composition and induced lattice defects on the accuracy of quantitative x-ray microanalysis of mineral materials with the electron probe microanalyzer (EPMA).
منابع مشابه
Sample Preparation for Electron Probe Microanalysis—Pushing the Limits
There are two fundamental considerations in preparing samples for electron probe microanalysis (EPMA). The first one may seem obvious, but we often find it is overlooked. That is, the sample analyzed should be representative of the population from which it comes. The second is a direct result of the assumptions in the calculations used to convert x-ray intensity ratios, between the sample and s...
متن کاملFundamental Constants for Quantitative X-ray Microanalysis.
Quantitative X-ray microanalysis requires the use of many fundamental constants related to the interaction of the electron beam with the sample. The current state of our knowledge of such constants in the particular areas of electron stopping power, X-ray ionization cross-sections, X-ray fluorescence yield, and the electron backscattering yield, is examined. It is found that, in every case, the...
متن کاملElectron channeling: a problem for x-ray microanalysis in materials science.
Electron channeling effects can create measurable signal intensity variations in all product signals that result from the scattering of the electron beam within a crystalline specimen. Of particular interest to the X-ray microanalyst are any variations that occur within the characteristic X-ray signal that are not directly related to a specimen composition variation. Many studies have documente...
متن کاملBarriers to Quantitative Electron Probe X-Ray Microanalysis for Low Voltage Scanning Electron Microscopy
Low voltage x-ray microanalysis, defined as being performed with an incident beam energy ≤5 keV, can achieve spatial resolution, laterally and in depth, of 100 nm or less, depending on the exact selection of beam energy and the composition of the target. The shallow depth of beam penetration, with the consequent short path length for x-ray absorption, and the low overvoltage, the ratio of beam ...
متن کاملQuantitative Energy-dispersive Electron Probe X-ray Microanalysis of Individual Particles
An electron probe X-ray microanalysis (EPMA) technique using an energy-dispersive X-ray detector with an ultra-thin window, designated low-Z particle EPMA, has been developed. The low-Z particle EPMA allows the quantitative determination of concentrations of low-Z elements such as C, N, and O, as well as higher-Z elements that can be analyzed by conventional energydispersive EPMA. The quantitat...
متن کامل