Grain Boundary Rotations near Crack Tips in Deformed Nanomaterials

نویسنده

  • A. G. Sheinerman
چکیده

A special mechanism/mode of plastic deformation occurring through stress-driven rotations of low-angle grain boundaries (GBs) near crack tips in nanocrystalline and ultrafinegrained (UFG) materials is theoretically described. It is demonstrated that such rotations of GBs represent energetically favorable processes in wide ranges of parameters characterizing precracked specimens with nanocrystalline and UFG structures. Also, these rotations of GBs in part release high stresses concentrated near crack tips and thus hamper crack growth. Nanoscale deformation processes occurring in nanowires, micropillars, nanocrystalline and UFG materials represents the subject of intensive research efforts in materials science and physics of ]P]bcadRcdaTbbTTTVNo O]]P]RahbcP[X]T and UFG bulk solids, specif ic (inherent to nanostructures) mechanisms/modes of plastic flow effectively operate due to the combined nanoscale and grain-boundary effectsN o O In nanowires and micropillars having either single crystalline or amorphous structures, the combined nanoscale and free-surface effects strongly influence plastic deformation processes and thereby strength and ductility [1,4-7,9,13]. Recently, a particular attention has been devoted to nanowires and micropillars with nanocrystalline and UFG structures Pbb[XSbfWTaTcWTcWaTTTUTRcbocWTnanoscale, grain-boundary and free-surface effectsoR TaP tively operate, which can cause the actions of unusual modes of plastic deformation [8,10,17,18]. For instance, the experiment [8] revealed GB transforPcX]b UP]TfchTo acPcX]boX] nanocrystalline Ni nanopillars under a mechanical load. In Letter [18], GB rotations were theoretically described as stress-driven processes representing a new deformation mechanism in solids. As it has been demonstrated in Letter [18], stress-driven rotations of GBs effectively carry plastic flow and transform GB defect configurations in nanocrystalline nanowires, nanopillars and thin films as well as within subsurface areas of bulk nanocrystalline solids due to the combined actions of the nanoscale, grain-boundary and free-surface effects. Plastic deformation carried by rotations of GBs is accompanied by crystal lattice rotations in the areas swept by rotating GBs [18] and thereby can be treated as a partial case of rotational deformation (defined as plastic deformation accompanied by crystal lattice acPcX]bN O [fX]VcWTTgTaXT]cP[SPcPN o 24], crystal lattice rotations intensively occur in vicinities of cracks growing in nanostructured (nanocrystalline or UFG) materials. In the context discussed, it is highly interesting to understand, if stress-driven GB rotations can occur and thereby R]caXQdcTccWTTgTaXT]cP[hQbTaeTSN o O crystal lattice rotations in vicinities of cracks grow-

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

National Symposium on Fatigue and Fracture Mechanics), Jacksonville, Florida Experimental Characterization and Simulation of Slip Transfer at Grain Boundaries and Microstructurally-Sensitive Crack Propagation

A systematic study of crack tip interaction with grain boundaries is critical for improvement of multiscale modeling of microstructurally-sensitive fatigue crack propagation and for the computationally-assisted design of more durable materials. In this study, single, biand large-grain multi-crystal specimens of an aluminum-copper alloy are fabricated, characterized using electron backscattered ...

متن کامل

In situ TEM observations of fast grain-boundary motion in stressed nanocrystalline aluminum films

Free-standing nanocrystalline Al thin films have been strained in situ in a transmission electron microscope at room-temperature. Extensive grain-boundary migration accompanies the in situ loading and has been observed to occur preferentially at crack tips and only in the presence of the applied stress. This grain growth precedes dislocation activity, and measured boundary velocities are greate...

متن کامل

Effect of Deformed and Plain Rebars on the Behavior of Lightly Reinforced Boundary Elements

Failure modes in recent earthquakes on lightly reinforced shear walls includes rebar fracture and out of plane buckling of its boundary elements. In latest edition of ACI 318 and also latest amendment of NZS 3101-2006 to avoid rebar fracture in boundary elements, the minimum reinforcement ratio for shear walls is increased. This experimental study investigates that rather than increasing reinfo...

متن کامل

A Fourth Order Formulation of DDM for Crack Analysis in Brittle Solids

A fourth order formulation of the displacement discontinuity method (DDM) is proposed for the crack analysis of brittle solids such as rocks, glasses, concretes and ceramics. A fourth order boundary collocation scheme is used for the discretization of each boundary element (the source element). In this approach, the source boundary element is divided into five sub-elements each recognized by a ...

متن کامل

Molecular-dynamics Study on Fracutre Property of Amorphous Metal with Crystallization

The fracture property of amorphous metal was studied by a large scale molecular dynamics (MD) simulation. The Finnis-Sinclair potential for α-iron was used as an inter-atomic potential. At first, we made a model amorphous metal by melting-rapid quenching simulation. And then a crystal growth simulation in the amorphous was performed. We used circular model, and the cracktip is assumed to be at ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014