Circuit Simulator Models for the Diode and IGBT with full temperature dependent features
نویسندگان
چکیده
The problems faced in generating analytical models for the IGBT and power diode are devising correct equations and determining realistic boundary conditions, especially for 2D features, while ensuring convergence of the models. These issues are addressed in this paper in relation to the temperature dependent modelling of IGBTs and diodes.
منابع مشابه
New 1700V SPT+ IGBT and Diode Chip Set with 175°C Operating Junction Temperature
In this paper we present a newly developed 1700V IGBT and diode chip set generation with optimized performances for 175°C junction temperature operations. The planar 1700V IGBT (SPT+) cell has been improved by exploiting the full potential of the N-enhancement layer with the consequent reduction of the conduction losses. In addition a substantial leakage current reduction has been achieved by d...
متن کاملModeling of the New Transient Behavioral Spice Model of IGBTs Including Temperature Effect
This paper presents an Analog behavioral model (ABM) of the Insulated Gate Bipolar Transistor (IGBT) with Orcad Pspice 16.5. The Spice model was built using device parameters extracted through experiment. A full study of switching behavior of IGBT during turn-off and turn-on for inductive load with freewheeling diode is presented and simulated. All simulation results presented in this paper are...
متن کاملVariable Speed Wind Turbine DFIG Back to Back Converters Open-Circuit Fault Diagnosis by Using of Combiniation Signal-Based and Model-Based Methodes
Condition monitoring (CM) and Fault Detection (FD) of wind turbine lead to increase in reliability and availability of turbine. IGBT open circuit of wind turbine converter will bring about depletion in output current of converter and as a result, reduction in production of wind turbine power. In this research, back to back converter IGBT open - gate fault for wind turbine based on DFIG is detec...
متن کاملLoss Characteristics of 6.5 kV RC-IGBT Applied to a Traction Converter
6.5 kV level IGBT (Insulated Gate Bipolar Transistor) modules are widely applied in megawatt locomotive (MCUs) traction converters, to achieve an upper 3.5 kV DC link, which is beneficial for decreasing power losses and increasing the power density. Reverse Conducting IGBT (RC-IGBT) constructs the conventional IGBT function and freewheel diode function in a single chip, which has a greater flow...
متن کاملParameter Extraction for a Physics-Based Circuit Simulator IGBT Module
A practical parameter extraction method is presented for the Fourier-based-solution physics-based IGBT model. In the extraction procedure, only one simple clamped inductive load test is needed for the extraction of the eleven and thirteen parameters required for the NPT and PT IGBT models, respectively. Validation with experimental results from various structure IGBTs demonstrates the accuracy ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003