Multiaxial high-cycle fatigue criterion and life prediction for metals
نویسندگان
چکیده
A new high-cycle fatigue criterion based on the critical plane approach is proposed in this paper. Unlike most of the other multiaxial fatigue criteria based on the critical plane approach, the critical plane is directly correlated with the fatigue fracture plane. The proposed criterion has a wide range of applicability from very ductile metals to extremely brittle metals. Mean stress effect is also included in this criterion. The new fatigue criterion is then extended to a fatigue life prediction model. The results of the proposed fatigue criterion and fatigue life prediction model are validated with experimental results from the literature. q 2005 Elsevier Ltd. All rights reserved.
منابع مشابه
A New Strain Based Model for Predicting Multiaxial Fatigue Life of Metals
Engineering structures are usually exposed to cyclic multiaxial loading and subsequently to multiaxial fatigue. Different models and criteria with various capabilities have been proposed for predicting of multiaxial fatigue life. Selection of proper model by considering material, type of loading and operation condition of each engineering structure is a challenging issue of the life prediction ...
متن کاملPrediction of Fatigue Life in Notched Specimens Using Multiaxial Fatigue Criteria
In this research, the effects of notch shape on the fatigue strength of 2024-T3 aluminum alloy notched specimens have been studied using experimental and multiaxial fatigue analysis. For this purpose, four set of specimens with different notch shape were prepared and then fatigue tests were carried out at various cyclic longitudinal load levels. Load controlled fatigue tests of mentioned specim...
متن کاملAssessment of the Existing Models to Estimate the Fatigue Life under both Multiaxial in Phase and 90° Out of Phase Loading Conditions
Engineers have a range of methods to estimate the fatigue life under multiaxial conditions. Each of these predictive methods is generally subjected to restrictions, related to the inherent simplified assumptions. The objective of this paper is to evaluate the validity of commonly used multiaxial fatigue criteria for different multiaxial loading conditions. The best criterion is identified throu...
متن کاملMultiaxial Fatigue Damage Parameter and Life Prediction without Any Additional Material Constants
Based on the critical plane approach, a simple and efficient multiaxial fatigue damage parameter with no additional material constants is proposed for life prediction under uniaxial/multiaxial proportional and/or non-proportional loadings for titanium alloy TC4 and nickel-based superalloy GH4169. Moreover, two modified Ince-Glinka fatigue damage parameters are put forward and evaluated under di...
متن کاملExperimental Investigation and Numerical Prediction of Fatigue Life in Force Fitted Fastener Holes
In this paper, the effect of interference fit on fatigue life of holed plate of mechanical joints was investigated experimentally. Fatigue tests were carried out on the holed specimens of Al-alloy 7075-T6 alloy. The interference fit process consists of force fitting a fastener into the hole with a negative clearance (diameter of the fastener is larger than of the hole) that produces beneficial ...
متن کامل