Defining And Maintaining Fluid Cleanliness For Maximum Hydraulic Component Life By Brendan Casey Many factors can reduce the service life of hydraulic components. Contamination of hydraulic fluid
ثبت نشده
چکیده
Particles larger than a component's internal clearances are not necessarily dangerous. Particles the same size as the internal clearance cause damage through friction. But the most dangerous particles in the long-term are those that are smaller than the component's internal clearances. Particles smaller than 5 microns are highly abrasive. If present in sufficient quantities, these invisible 'silt' particles cause rapid wear, destroying hydraulic components.
منابع مشابه
Minimization of the Sheet Thinning in Hydraulic Deep Drawing Process Using Response Surface Methodology and Finite Element Method
In most of the sheet forming processes, production of the parts with minimum thickness variation and low required force is important. In this research, minimization of the sheet thinning and forming force in the hydraulic deep drawing process has been studied. Firstly, the process is simulated using the finite element method (FEM) and simulation model is verified using the experimental results....
متن کاملNumerical Simulation of Hydraulic Frac-turing Process for an Iranian Gas Field in the Persian Gulf
Most of the Iranian oil and gas wells in the Persian Gulf region are producing through their natural productivity and, in the near future, the use of stimulation methods will be undoubtedly necessary. Hydraulic fracturing as a popular technique can be a stimulation candidate. Due to the absence of adequate research in this field, numerical simulation can be an appropriate method to investigate ...
متن کاملInvestigating the Influence of Filter Uniformity Coefficient and Effective Pore Size on Critical Hydraulic Gradient and Maximum Erosion of Dispersive and Non-dispersive Samples
Filter is one of the main components of embankment dams. By a simple but effective performance, filter protects the dam against erosion and soil scouring in impervious core caused by leakage (piping) and makes it safe. Interaction between filter and erodible base soil is a complex phenomenon which is dependent upon several factors, and has challenged researchers for better understanding the fil...
متن کاملComputational fluid dynamics study and GA modeling approach of the bend angle effect on thermal-hydraulic characteristics in zigzag channels
In the study, the thermal-hydraulic performance of the zigzag channels with circular cross-section was analyzed by Computational Fluid Dynamics (CFD). The standard K-Ꜫ turbulent scalable wall functions were used for modeling. The wall temperature was assumed constant 353 K and water was used as the working fluid. The zigzag serpentine channels with bend angles of 5 - 45° were studied for turbul...
متن کاملNumerical optimization of hydrofoil geometry for a Darrieus hydraulic turbine using dynamic mesh and central composite design
In this study, a Darrieus hydraulic turbine for power generation applications is chosen and the response surface methodology (RSM) based on central composite design (CCD) is applied to obtain the optimized design for its hydrofoil geometry to increase the torque coefficient. For this aim, all turbine performance factors, except hydrofoil geometry, were considered to be constant and the turbine ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003