Temperature Field Calculation and Analysis within Steel Tube Reinforced Columns
نویسندگان
چکیده
The temperature field analysis method of steel tube reinforced columns under fire by finite element analysis software ABAQUS is proposed in this paper. The theoretical method is validated by tests, and the calculated results agree well with those of tests. On the basis of that, the influencing laws of temperature rising time; section perimeter; steel reinforcement ratio and sectional core area ratio on temperature field are discussed. It has been found that the surface temperatures of steel tube reinforced columns increase obviously with temperature rising time, and the temperatures of steel tubes and core concrete increase slowly. The effects of section size and sectional core area ratio on temperature field are significant, but steel ratio has very little effect on temperature both of steel tube and of sectional center. These achievements make it possible to study further theoretical study on the mechanic performance of steel tube reinforced concrete columns in fire.
منابع مشابه
Experimental and Numerical Study on Bar-Reinforced Concrete Filled Steel Tubular Columns Under Axial Compression
The behaviors of bar-reinforced concrete filled steel tubular columns subjected to axial load were studied. One plain concrete filled steel tubular column and three bar-reinforced concrete filled steel tubular columns were tested. The deformation of specimens and the strain of steel tubes were measured. Based on experimental researches, a simple numerical analysis method was presented to simula...
متن کاملExperimental Study on Performance of Fiber Concrete-filled Tube Columns under Axial Loading
There have been great developments in the area of civil engineering in the recent few decades and among these, construction and material innovation are quite prominent. Steel-concrete composite construction has emerged as one of the fastest methods of construction. Even though considerable research efforts on conventional reinforced concrete columns have been executed prior to now, concrete fil...
متن کاملNeural Networks Method Applied to the Property Study of Steel-concrete Composite Columns under Axial Compression
In this paper, a new type of steel-concrete composite member, concrete-filled core steel tube with outer angle steel plank reinforced concrete stub column, is proposed and a series of nonlinear 3D(three-dimensional) full-range numerical calculations under axial compression are carried out, some important factors are analyzed, such as the strength of the concrete, the steel tube and the angle st...
متن کاملNumerical and Experimental Investigations on the Behavior of Steel-reinforced Concrete Columns Subjected to Eccentric Loading
Steel-reinforced concrete (SRC) columns, which are classified as composite columns, became the most widely used in recent years; because of their extensive advantages over the reinforced concrete and the steel columns. In this paper, the ductility index and its influential factors were explored to investigate the behavior of SRC columns. A straightforward approach was then proposed by establish...
متن کاملDynamic and Static Behavior of Hollow-Core FRP-Concrete-Steel and Reinforced Concrete Bridge Columns under Vehicle Collision
This paper presents the difference in behavior between hollow-core fiber reinforced polymer-concrete-steel (HC-FCS) columns and conventional reinforced concrete (RC) columns under vehicle collision in terms of dynamic and static forces. The HC-FCS column consisted of an outer FRP tube, an inner steel tube, and a concrete shell sandwiched between the two tubes. The steel tube was hollow inside a...
متن کامل