Minimum Time Control Using Straight Transfer for a Rotary Crane
نویسندگان
چکیده
This paper provides a feedforward control method for controlling the load vibration of a rotary crane using a straight transfer transformation (STT) model. The parameters of the model were geometrically derived. The minimum time control problem was solved for the revised STT model by means of both clipping-off technique for the constraints of control inputs amplitude and the Bisection Method. Preshaping control method is also discussed for comparison with proposed minimum time control. Finally, proposed control method using the STT model was demonstrated to be effective in eliminating the influence of centrifugal force through simulation and experiments. Copyright c ©2005 IFAC
منابع مشابه
Sway Control Experiment of Rotary Crane Using Linear Transfer Transformation Model
This paper presents a method to control the sway of a rotary crane by using a linear transfer transformation (LTT) model. The LTT model is built and its parameters are geometrically derived. Optimal control of a rotary crane is presented using an optimization method of Fletcher-Reeves so that the load has no sway at the end point of the transfer. The effectiveness of the proposed control method...
متن کاملMINIMUM TIME SWING UP AND STABILIZATION OF ROTARY INVERTED PENDULUM USING PULSE STEP CONTROL
This paper proposes an approach for the minimum time swing upof a rotary inverted pendulum. Our rotary inverted pendulum is supported bya pivot arm. The pivot arm rotates in a horizontal plane by means of a servomotor. The opposite end of the arm is instrumented with a joint whose axisis along the radial direction of the motor. A pendulum is suspended at thejoint. The task is to design a contro...
متن کاملLearning Control of an Overhead Crane for Obstacle Avoidance - American Control Conference, 1997. Proceedings of the 1997
A control strategy is presented for a 3-dimensional overhead crane. Using the differential flatness of the crane and a parameterization method, we calculate the optimal trajectory of the payload that results in minimum transfer time when there exist obstacles in the direct moving path. A learning algorithm is then used to generate the desired feedforward input signal that can drive the system o...
متن کاملLearning and Ha, Control of an Overhead Crane for Obstacle Avoidlance and Disturbance Rejection
A control strategy is developed for a 3-dimensional overhead crane. Using the differential flatness of the crane and a parameterization method, we first calculate the optimal trajectory of the payload that results in minimum transfer time when there exist obstacles in the direct moving path. A learning algorithm is then used to generate the desired feed forward input signal that can drive the s...
متن کاملTOWER CRANES AND SUPPLY POINTS LOCATING PROBLEM USING CBO, ECBO, AND VPS
Tower cranes are major and expensive equipment that are extensively used at building construction projects and harbors for lifting heavy objects to demand points. The tower crane locating problem to position a tower crane and supply points in a building construction site for supplying all requests in minimum time, has been raised from more than twenty years ago. This problem has already been so...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005