Fabrication of Microstructures on RB-SiC by Ultrasonic Cavitation Assisted Micro-Electrical Discharge Machining
نویسندگان
چکیده
∗Department of Mechanical Systems and Design, Tohoku University 6-6-01 Aoba, Aramaki, Aoba-ku, Sendai 980-8579, Japan E-mail: [email protected] ∗∗Department of Mechanical Engineering, Faculty of Science and Technology, Keio University 3-14-1 Hiyoshi, Kohoku-ku, Yokohama 223-8522, Japan ∗∗∗Manufacturing Process Department, Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
منابع مشابه
Influences and Optimization of Electrical Discharge Machining Parameters for Improving form Tolerances of Micro Hole on SiC Conductive Ceramic Composite
Advanced Ceramics find wide range of industrial applications. Cutting of advanced ceramic (SiC) is very difficult using conventional machining methods due to its low fracture toughness. In the past few years, researchers have claimed successful machining of ceramic composites using EDM process. Furthermore, increasing trend, necessity of miniaturization, micro components in MEMS and semiconduct...
متن کاملMechanical Surface Treatments of Ti-6Al-4V Miniplate Implant Manufactured by Electrical Discharge Machining (TECHNICAL NOTE)
Present work aims at multi-mechanical surface treatment of Ti-6Al-4V based-miniplate implant manufactured by electrical discharge machining (EDM) for biomedical use. Mechanical surface treatment consists of consequent use of ultrasonic cleaning, rotary tumbler polishing, and brushing. Surface layers are analyzed employing scanning electron microscopy and energy dispersive X-ray spectroscopy. Al...
متن کاملBatch Mode Micromanufacturing Based on Micro Electro-discharge Machining and Micro Ultrasonic Machining for Micro Electro Mechanical Systems (mems)
Metal alloys have material properties that are very appealing for micro electro mechanical systems (MEMS), but present a challenge for process integration within a lithographic manufacturing sequence of the type used in the semiconductor industry. The batch-mode micro electrodischarge machining (μEDM) discussed here uses lithographically-fabricated electrode arrays with high density and high un...
متن کاملMulti-objective optimization and analysis of electrical discharge machining process during micro-hole machining of D3 die steel employing salt mixed de-ionized water dielectric
Correct selection of manufacturing condition is one of the most important aspects which should be considered in the majority of manufacturing processes, particularly in the process related to advanced machining process like electrical discharge machining. In electrical discharge machining (EDM), dielectric fluid plays an important role since machining characteristics are greatly influenced by ...
متن کاملUltrasonic Vibration Assisted Electro-Discharge Machining
An ultrasonic vibration has been superposed on the normal electrode movement to increase the flushing effect during a micro electro-discharge machining (EDM) process. A systematic study on the effects of ultrasonic vibration on the EDM performance for fabricating microholes in Nitinol has been completed. The introduction of ultrasonic vibration to the microEDM process has more than 60 times inc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- IJAT
دوره 7 شماره
صفحات -
تاریخ انتشار 2013