A Low Power Cmos Transceiver Design for Medical Impant Communication Service
نویسندگان
چکیده
An ultra low power CMOS transceiver has been designed for a usage in medical implant communication service devices. The FCC regulated MICS band which is 402405 MHz, requires ultra low power transceiver for medical implants. The following section gives a brief description of different sections of transceiver. The schematic and measurement results are included for each sub-block of the transceiver. There are three main section in this transceiver; Receiver, Transmitter and Frequency Synthesizer.
منابع مشابه
Tehrahertz CMOS Design for Low-Power and High-Speed Wireless Communication
There have recently been more and more reports on CMOS integrated circuits operating at terahertz (≥ 0.1THz) frequencies. However, design environments and techniques are not as well established as for RF CMOS circuits. This paper reviews recent progress made by the authors in terahertz CMOS design for low-power and high-speed wireless communication, including device characterization and modelin...
متن کاملIntegrated VCOs for Medical Implant Transceivers
The 402-405 MHz MICS (Medical Implant Communication Service) band has recently been allocated by the US Federal Communication Commission (FCC) with the potential to replace the low frequency inductive coupling techniques in implantable devices. This band was particularly chosen to provide full-integration, low-power, faster data transfer and longer communication range. This paper investigates t...
متن کاملDesign of Gate-Driven Quasi Floating Bulk OTA-Based Gm–C Filter for PLL Applications
The advancement in the integrated circuit design has developed the demand for low voltage portable analog devices in the market. This demand has increased the requirement of the low-power RF transceiver. A low-power phase lock loop (PLL) is always desirable to fulfill the need for a low power RF transceiver. This paper deals with the designing of the low power transconductance- capacitance (Gm-...
متن کاملReview on Design and Performance Analysis of Low Power Transceiver Circuit in Wireless Sensor Network
WSN is wireless sensor network which consist of numbers of nodes. Transceiver has main role in WSN node. Transceiver consists of both transmitter as well as receiver. Power amplifier, low noise amplifier, mixer, voltage control oscillator are the main block of Transceiver. Power amplifiers are a key part of RF transmitters. 2.4 GHz RF CMOS power amplifier implemented with SMIC 0.13μm is propose...
متن کاملA Power Efficient 2Gb/s Transceiver in 90nm CMOS for 10mm On-Chip Interconnect
Global on-chip data communication is becoming a concern as the gap between transistor speed and interconnect bandwidth increases with CMOS process scaling. In this paper a low-swing transceiver for 10mm long 0.54μm wide on-chip interconnect is presented, which achieves a similar data rate as previous designs (a few Gb/s), but at much lower power than recently published work. Both low static pow...
متن کامل