Investigation of strain measurements in (curved) wide plate specimens using digital image correlation and finite element analysis

Some pipelines face global plastic straining due to the nature of their installation process or harsh environmental conditions during operation. The ability of the girth welds to withstand these plastic strains is often evaluated on the basis of wide plate tests. Key for the validity of these tests is a representative measurement of remote strain, mostly obtained by linear variable differential transformers and/or strain gauges. The outcome of the remote strain measurement depends on the specimen geometry and the position of these sensors. In an attempt to investigate a specific geometric design of wide plate specimens and to find appropriate remote strain sensor positions, the authors have performed a series of tension tests on medium-sized wide plate specimens, supported by digital image correlation strain measurements. In addition, finite element simulations have been performed to evaluate whether the experimental observations can be extrapolated to a wider range of conditions. The results indicate that the strain distribution is mostly influenced by the weld strength mismatch, which governs the lateral restraint. For all experiments and simulations, nevertheless, the strain field was highly uniform in an identified zone, resulting in simple guidelines regarding specimen geometry and sensor positioning.