INTEGRATED REFERENCE CIRCUITS FOR LOW-POWER CAPACITIVE SENSOR INTERFACES Doctoral Dissertation
نویسندگان
چکیده
OF DOCTORAL DISSERTATION AALTO UNIVERSITY SCHOOL OF SCIENCE AND TECHNOLOGY P.O. BOX 11000, FI-00076 AALTO http://www.aalto.fi Author Matti Paavola Name of the dissertation Manuscript submitted May 24, 2010 Manuscript revised August 24, 2010 Date of the defence October 1, 2010 Article dissertation (summary + original articles) Monograph Faculty Department Field of research Opponent(s) Supervisor Instructor Abstract
منابع مشابه
A MEMS Capacitive Microphone Modelling for Integrated Circuits
In this paper, a model for MEMS capacitive microphone is presented for integrated circuits. The microphone has a diaphragm thickness of 1 μm, 0.5 × 0.5 mm2 dimension, and an air gap of 1.0 μm. Using the analytical and simulation results, the important features of MEMS capacitive microphone such as pull-in voltage and sensitivity are obtained 3.8v and 6.916 mV/Pa, respectively while there is no...
متن کاملDesign and Construction of a New Capacitive Tactile Sensor for Measuring Normal Tactile Force
This paper presents the design, construction and testing of a new capacitive tactile sensor for measurement of normal tactile force. The operation of proposed sensor has been investigated in ASTABLE and MONOSTABLE circuits. According to the results of these circuits the deviation of ASTABLE circuit results is less than MONOSTABLE circuit results. In addition, the results obtained from ASTABLE c...
متن کاملLow-power Front-ends for Capacitive Three-axis Accelerometers
OF DOCTORAL DISSERTATION AALTO UNIVERSITY SCHOOL OF SCIENCE AND TECHNOLOGY P.O. BOX 11000, FI-00076 AALTO http://www.aalto.fi Author Mika Kämäräinen Name of the dissertation Manuscript submitted June 21, 2010 Manuscript revised October 17, 2010 Date of the defence November 12, 2010 Article dissertation (summary + original articles) Monograph Faculty Department Field of research Opponent(s) Supe...
متن کاملComparison of Two Low-Power Electronic Interfaces for Capacitive Mems Sensors
The paper discusses the importance and the issues of interfacing capacitive sensors. Two architectures applicable for interfacing capacitive sensors are presented. The first solution was designed to interface a capacitive humidity sensor designed and built for a humiditydependent monolithic capacitor developed at Budapest University of Technology and Economics. The second case presents the poss...
متن کاملCapacitive Sensor Circuit Interface
Capacitive sensing is becoming a popular technology to replace optical detection methods and The FDC1004's basic operation of capacitive sensing implements a switched capacitor circuit to transfer interface.ti.com. Find design resources for Capacitive Sensing. I2C Interface (8) using the AT42QT1060-MMU ('QT1060') 6 Channel QTouchTM Integrated Circuit (IC). Silicon Labs' 8and 32-bit capacitive t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010