High-quality AlN epitaxy on nano-patterned sapphire substrates prepared by nano-imprint lithography

نویسندگان

  • Lisheng Zhang
  • Fujun Xu
  • Jiaming Wang
  • Chenguang He
  • Weiwei Guo
  • Mingxing Wang
  • Bowen Sheng
  • Lin Lu
  • Zhixin Qin
  • Xinqiang Wang
  • Bo Shen
چکیده

We report epitaxial growth of AlN films with atomically flat surface on nano-patterned sapphire substrates (NPSS) prepared by nano-imprint lithography. The crystalline quality can be greatly improved by using the optimized 1-μm-period NPSS. The X-ray diffraction ω-scan full width at half maximum values for (0002) and (102) reflections are 171 and 205 arcsec, respectively. The optimized NPSS contribute to eliminating almost entirely the threading dislocations (TDs) originating from the AlN/sapphire interface via bending the dislocations by image force from the void sidewalls before coalescence. In addition, reducing the misorientations of the adjacent regions during coalescence adopting the low lateral growth rate is also essential for decreasing TDs in the upper AlN epilayer.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Abbreviated MOVPE nucleation of III-nitride light-emitting diodes on nano-patterned sapphire

Metalorganic vapor phase epitaxy (MOVPE) nucleation studies of GaN on planar sapphire and nanopatterned AGOG (Deposition of Aluminum, Growth of Oxide, and Grain growth) sapphire substrates were conducted. The use of abbreviated GaN growth mode, which utilizes a process of using 15 nm low-temperature GaN buffer and bypassing etch-back and recovery processes during epitaxy, enables the growth of ...

متن کامل

AN ORION PLUS Ion Beam Lithography

Direct write lithography is used in all phases of nanotechnology development activities. In research, it is utilized to create nanostructures into which functional materials can be patterned on the nano-scale. In process development, direct patterning allows the flexible creation of devices with varying features to optimize behavior. In manufacturing of semiconductors and data storage devices, ...

متن کامل

Improvement of photon extraction efficiency of GaN-based LED using micro and nano complex polymer structures

A micro- and nanoscale complex structure made of a high refractive index polymer (n = 2.08) was formed on the ITO electrode layer of an edge-emitting type GaN blue light-emitting diode (LED), in order to improve the photon extraction efficiency by suppressing total internal reflection of photons. The nanoimprint lithography process was used to form the micro- and nanoscale complex structures, u...

متن کامل

Large-scale fabrication of nanopatterned sapphire substrates by annealing of patterned Al thin films by soft UV-nanoimprint lithography

Large-scale nanopatterned sapphire substrates were fabricated by annealing of patterned Al thin films. Patterned Al thin films were obtained by soft UV-nanoimprint lithography and reactive ion etching. The soft mold with 550-nm-wide lines separated by 250-nm space was composed of the toluene-diluted polydimethylsiloxane (PDMS) layer supported by the soft PDMS. Patterned Al thin films were subse...

متن کامل

Recent Situation of the UV Imprint Lithography and Its Application to the Photonics Devices

Optical communication systems with large capacity that support the today’s global information and communication society are made up from high-performance photonic devices. To develop higher functional photonic devices, nanotechnology plays an important role for their production. There are two major optical elements of the photonic device, that is, diffraction grating with one-dimensional period...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2016