Free Vibrations of a Stiffened Cylindrical Shell

نویسنده

  • P. R. MILLER
چکیده

~This report presents the first stage of an investigation of the response to random noise of a stiffened cylinder, representing an aircraft fuselage, including an analysis of the lower modes of such a cylinder. Preliminary investigations suggested that assumptions and approximations which are valid for the uniform, i.e., unstiffened, shell are not necessarily valid for a shell with heavy stiffening, and this report therefore starts with a review of existing theories in which the assumptions are examined critically, and, it is hoped, somewhat rationalised. There is very little literature on stiffened shells and this review deals mainly with uniform ones, including the general analysis of strain in a thin shell and the vibrations of a uniform cylindrical shell in vacuo, but includes some comments on the effects of an acoustic medium round the shell. The energy approach is then extended to give the resonant frequencies and natural modes of a circular cylindricaI shell uniformly stiffened with closely spaced longerons and frames, ' close spaced' implying that stiffener spacing is much less than the spacing of nodal lines. The effects of rotary inertia have had to be included owing to tile lack of symmetry of the section about the skin, but shear deflections are still neglected. Further numerical work is required "before much comment can be made on tile results, but they seem to be similar in nature to those obtained for the uniform cylinder. Finally, some indication is given of how the theory can be extended to cover higher-order modes where shear deflection and stiffener spacing become important.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

On the Free Vibration Behavior of Cylindrical Shell Structures

Shell structures, especially cylindrical shells, are widely used in aerospace and naval architectural industries. Submarine hulls and aircraft bodies can be idealized as cylindrical shell structures. The study of vibrations of cylindrical shells is an important aspect in the successful applications of the cylindrical shells. The free vibration characteristics of a submarine hull have an importa...

متن کامل

Experimental and Numerical Free Vibration Analysis of Hybrid Stiffened Fiber Metal Laminated Circular Cylindrical Shell

The modal testing has proven to be an effective and non-destructive test method for estimation of the dynamic stiffness and damping constant. The aim of the present paper is to investigate the modal response of stiffened Fiber Metal Laminated (FML) circular cylindrical shells using experimental and numerical techniques. For this purpose, three types of FML-stiffened shells are fabricated by a s...

متن کامل

Optimization of Composite Stiffened Cylindrical Shell using PSO Algorithm

Composite stiffened cylindrical shells are widely used as primary elements in aerospace structures. In the recent years, there has been a growing research interest in optimum design of composite stiffened cylindrical shell structures for stability under buckling load.  This paper focuses upon the development of an efficient optimization of ring-stringer stiffened cylindrical shell. The opti...

متن کامل

Neural Prediction of Buckling Capacity of Stiffened Cylindrical Shells

Estimation of the nonlinear buckling capacity of thin walled shells is one of the most important aspects of structural mechanics. In this study the axial buckling load of 132 stiffened shells were numerically calculated. The applicability of artificial neural networks (ANN) in predicting the buckling capacity of vertically stiffened shells was studied. To this end feed forward (FF) multi-layer ...

متن کامل

Buckling of Stiffened Thin-Walled Cylindrical Shells under Axial Compression with Symmetrical Imperfections

This study aimed to investigate the effects of stiffeners on buckling of thin cylindrical shells under uniform axial compression. To this end, more than 300 finite element models of stiffened cylindrical shells were prepared. The variables considered are shell thickness, number, dimension and the location of the vertical and horizontal stiffeners as well as circular symmetrical imperfections. R...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1957