High Voltage Resistive Dividers At Low Cost
نویسندگان
چکیده
It is presented the design and construction of resistive voltage dividers 150 KV class for DC and AC measurements in a high voltage laboratory, using low cost commercial elements.
منابع مشابه
Comparative High Voltage Impulse Measurement
A facility has been developed for the determination of the ratio of pulse high voltage dividers over the range from 10 kV to 300 kV using comparative techniques with Kerr electro-optic voltage measurement systems and reference resistive voltage dividers. Pulse voltage ratios of test dividers can be determined with relative expanded uncertainties of 0.4 % (coverage factor k = 2 and thus a two st...
متن کاملThe Design and Characterization of a Prototype Wideband Voltage Sensor Based on a Resistive Divider
The most important advantage of voltage dividers over traditional voltage transformers is that voltage dividers do not have an iron core with non-linear hysteresis characteristics. The voltage dividers have a linear behavior with respect to over-voltages and a flat frequency response larger frequency range. The weak point of a voltage divider is the influence of external high-voltage (HV) and e...
متن کاملA Novel Resistive Capacitive Feedback Trans-impedance Amplifier Optimization Using IPSO Algorithm
A novel low noise trans-impedance amplifier is proposed using low cost 0.18 µm CMOS technology. A resistive-capacitive feedback is used to extend the bandwidth of the amplifier. As the structure is inductor less, it is suitable for low cost integrated optical interconnects. In this paper Improved Particle Swarm Optimization have applied to determine optimal trans-resistance and noise of propose...
متن کاملCharge-transfer-based Signal Interface for Resistive Sensors
Charge transfer has been demonstrated to be a cost-effective method to measure capacitive sensors with low-end microcontrollers. Here we apply charge transfer to measure the output of voltage dividers that include a highvalue resistive sensor hence extending the advantages of this method to a large group of sensors. By using two-point calibration, the maximal deviation obtained, referred to t...
متن کاملCharacterisation at Low Voltage of Two Reference Lightning Impulse Dividers
An effort is pursued by several European National Measurement Institutes to lower the uncertainties in calibration of UHV measuring systems for lighting impulse. To this end, several reference dividers are investigated as regards their accuracy both for amplitude and for time parameters. At SP RISE Research Institutes of Sweden, a 500 kV resistive reference divider has been in use since 2000. A...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003