Three-dimensional analysis of flow-chemical interaction within a single square channel of a lean NOx trap catalyst
نویسندگان
چکیده
A fully 3D unsteady Computational Fluid Dynamics (CFD) approach coupled with heterogeneous reaction chemistry is presented in order to study the behavior of a single square channel as part of a Lean [Formula: see text] Traps. The reliability of the numerical tool has been validated against literature data considering only active BaO site. Even though the input/output performance of such catalyst has been well known, here the spatial distribution within a single channel is investigated in details. The square channel geometry influences the flow field and the catalyst performance being the flow velocity distribution on the cross section non homogeneous. The mutual interaction between the flow and the active catalyst walls influences the spatial distribution of the volumetric species. Low velocity regions near the square corners and transversal secondary flows are shown in several cross-sections along the streamwise direction at different instants. The results shed light on the three-dimensional characteristic of both the flow field and species distribution within a single square channel of the catalyst with respect to 0-1D approaches.
منابع مشابه
Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer
A three dimensional, compressible, steady, one phase flow of reactant-product mixture in the air side electrode of proton exchange membrane fuel cell (PEMFC) is numerically studied in this paper. The mixture is composed of three species: oxygen, nitrogen and water vapor. The performance of the cell is enhanced by partial blockage of the flow field channels. Various types of these blocks also ca...
متن کاملProduct speciation during regeneration of lean NOx traps
A set of elementary surface reactions is proposed for modeling the chemistry in a lean NOx trap during regeneration (reduction of stored NOx). The proposed reaction mechanism is based on a series of flow reactor temperature ramp experiments performed on a core sample from a fully formulated lean NOx trap catalyst. The experiments used simultaneous flow of NOx and reductant species (H2 and CO) t...
متن کاملProject Title : Analysis of a Novel Platinum Free Catalyst for Use in a Simulated Lean NO x Trap
Strict environmental regulations on air quality coupled with a consumer desire for more efficient engines has forced the automotive industry to start developing more advanced emissions aftertreatment technologies. Of the common diesel exhaust treatment methods for NOx removal, Lean NOx Traps (LNT) have been recognized as the most practical for use in small displacement engines. The current stat...
متن کاملGlobal Kinetic Modeling of Lean NOx Traps
Lean NOx traps are an important concept for reducing NOx in lean exhausts from diesel engines and lean burn gasoline engines. A global kinetic model has been developed in this work that can describe the NOx emissions after the catalyst. The model is based on flow reactor experiments using a model Pt/Rh/BaO/Al2O3 catalyst. The objective with the model was to use global kinetics to facilitate rap...
متن کاملMHD Nanofluid Flow Analysis in a Semi-Porous Channel by a Combined Series Solution Method
In this paper, Least Square Method (LSM) and Differential Transformation Method (DTM) are used to solve the problem of laminar nanofluid flow in a semi-porous channel in the presence of transverse magnetic field. Due to existence some shortcomings in each method, a novel and efficient method named LS-DTM is introduced which omitted those defects and has an excellent agreement with numerical sol...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 4 شماره
صفحات -
تاریخ انتشار 2018