The catalytic cracking of hydrocarbons: paraffins in the HZSM-5 zeolite.
نویسندگان
چکیده
An elementary reaction during cracking of a hydrocarbon in a nanoporous silicalite catalyst includes ejection of a hydrid ion as shown in the picture. The reaction was simulated by means of quantum molecular dynamics.
منابع مشابه
Catalytic Conversion of Methanol to Hydrocarbons over different wt% Ni-HZSM-5
Due to crude oil is limited, new resources for fuel and petrochemicals are important to be developed. Biogas or NG (Natural Gas) can be easily converted into methanol which can be reacted over zeolite to produce olefins and gasoline. HZSM-5 zeolite catalyst has been used in this study and its modification by (0.5wt%, 1wt%, 2wt% and 4wt %) Ni to convert methanol to hydrocarbons (MTH). Catalysts ...
متن کاملStrategies to Enhance the Catalytic Performance of ZSM-5 Zeolite in Hydrocarbon Cracking: A Review
ZSM-5 zeolite is widely used in catalytic cracking of hydrocarbon, but the conventional ZSM-5 zeolite deactivates quickly due to its simple microporous and long diffusion pathway. Many studies have been done to overcome these disadvantages recently. In this review, four main approaches for enhancing the catalytic performance, namely synthesis of ZSM-5 zeolite with special morphology, hierarchic...
متن کاملCatalytic Reforming of n-Heptane on Platimum - Rhenium Supported on Gamma-Alumina
Catalyitic reforming is one of the refinery processes in catalyst conversion that results to anincreases in octane number of naphtan which leads to production of gasoline with higher octanenumber. Hydrocarbons with high octan number that are produced in reforming process are as;aromatics, paraffins, isomers and etc.Not only Aromatics are used as fuel for motors but they are also useful in petro...
متن کاملCatalytic Cracking of Butene to Propylene over Modified HZSM-5 Zeolites
Catalytic cracking of butene to propylene was carried out in a continuous-flow fixed-bed reactor over HZSM-5 catalysts modified by nickel and phosphorus. The structure and acidity of catalysts were measured by N2 adsorption, NH3-TPD and XPS. The results revealed that surface area and strong acid sites both decreased with increasing phosphorus loadings. The increment of phosphorus loadings reduc...
متن کاملThe Catalytic Cracking of Hydrocarbons in a Riser Simulator: The Effect of Catalyst Accessibility and Acidity
_____________________________________________________________ Different catalysts based on Y-zeolite, ZSM-5 and amorphous kaolin were prepared and characterized. The catalytic cracking of 1,3,5-triisopropylbenzene (1,3,5-TIPB), 1,4diisopropylbenzene (1,4-DIPB) and n-dodecane were used to investigate the effect of catalyst nature on the catalytic performance. Cracking the largest molecule (1,3,5...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemphyschem : a European journal of chemical physics and physical chemistry
دوره 2 11 شماره
صفحات -
تاریخ انتشار 2001