Role of air in granular jet formation.

نویسندگان

  • Gabriel Caballero
  • Raymond Bergmann
  • Devaraj van der Meer
  • Andrea Prosperetti
  • Detlef Lohse
چکیده

A steel ball impacting on a bed of very loose, fine sand results in a surprisingly vigorous jet which shoots up from the surface of the sand [D. Lohse, Phys. Rev. Lett. 93, 198003 (2004)10.1103/PhysRevLett.93.198003]. When the ambient pressure p is reduced, the jet is found to be less vigorous [R. Royer, Nature Phys. 1, 164 (2005)10.1038/nphys175]. In this Letter we show that p also affects the rate of penetration of the ball: Higher pressure increases the rate of penetration, which makes the cavity created by the ball close deeper into the sand bed, where the hydrostatic pressure is stronger, thereby producing a more energetic collapse and jetting. The origin of the deeper penetration under normal ambient pressure is found to lie in the extra sand fluidization caused by the air flow induced by the falling ball.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Clustering instability in a freely falling granular jet.

This paper investigates a clustering instability of a freely falling granular jet composed of 100 microm glass spheres. The granular flow out of a circular nozzle starts out spatially uniform and then, further downstream, breaks up into well-defined clusters. An optical method is used that measures inhomogeneities in the flow in order to quantify the growth of the clusters. The role of air is i...

متن کامل

Impact on soft sand: void collapse and jet formation.

Very fine sand is prepared in a well-defined and fully decompactified state by letting gas bubble through it. After turning off the gas stream, a steel ball is dropped on the sand. On impact of the ball, sand is blown away in all directions ("splash") and an impact crater forms. When this cavity collapses, a granular jet emerges and is driven straight into the air. A second jet goes downwards i...

متن کامل

Simulation Model for Weft Yarn Motion in a Single-Nozzle Air-Jet Loom

Air-jet weaving is an advanced weaving method with high efficiency and productivity. It is one of the most widely used methods of weaving in the world. In air-jet filling insertion, the motion of weft yarn is caused by friction between weft yarn and air blown through nozzle. After declamping and subjecting the yarn to air stream, its motion is not active but very complicated and influenced by ...

متن کامل

Simulation Model for Weft Yarn Motion in a Single-Nozzle Air-Jet Loom

Air-jet weaving is an advanced weaving method with high efficiency and productivity. It is one of the most widely used methods of weaving in the world. In air-jet filling insertion, the motion of weft yarn is caused by friction between weft yarn and air blown through nozzle. After declamping and subjecting the yarn to air stream, its motion is not active but very complicated and influenced by ...

متن کامل

طراحی و ساخت نازل جت چند گانه با هدف کاهش صدای ناشی از تفنگ های بادپاش

Background and aims: Discharging compressed air through conventional single jet nozzles or open pipes is a common jet noise in industry. This study is aimed to reduce air blow gun jet noise by designing and fabrication of multiple jet nozzle as a substitute for conventional single jet nozzles.  Methods: One of the most common commercial air blow gun equipped with a conventional single j...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical review letters

دوره 99 1  شماره 

صفحات  -

تاریخ انتشار 2007