High Frequency Dielectric Characteristics of Electrochromic, WO3 and NiO Films with LiNbO3 Electrolyte
نویسندگان
چکیده
A great deal of attention has been recently focused on Electrochromic (EC) materials and EC based devices, promoting mainly applications related to display technology. In this case, EC based displays are usually actuated by the application of low dc bias voltages, changing their appearance from transparent to opaque. A variety of studies related to the optical characteristics of EC materials have been reported, however, no serious studies so far have been reported on the possible high frequency tunability of the dielectric characteristics of these materials, with the exception of the work by Rose, which presented the operation of a microwave shutter based on conductive polymers operating in the X-band. Here we report tuneable high frequency dielectric characteristics of an Electrochromic (EC) cell with a complimentary structure of Conductor/WO3/LiNbO3/NiO/Conductor in the frequency range from 1 GHz to 20 GHz. The EC cell was prepared using standard semiconductor processing technology, such as lithography, etch and deposition techniques. Our measured results indicate that tunability of high frequency dielectric characteristics as a function of dc bias voltage is achieved, and that a possibility exists for this tunability to be tailored.
منابع مشابه
تأثیر دمای بازپخت بر ویژگیهای اپتیکی و الکتروکرومیکی فیلمهای نازک اکسید تنگستن
Tungsten trioxide (WO3) thin films were coated onto fluorine tin oxide coated glass substrates, using electrodeposition technique via aqueous solution of peroxotungstic acid. WO3 films were evaluated as a function of annealing temperature (60°C, 100°C, 250°C and 400°C). The films were analyzed by field emission Scanning Electron Microscopy (SEM), UV-visible spectrometer and cyclic voltammogram....
متن کاملDesigning and Fabrication of Electrochromic Windows Using Tungsten Oxide Films Prepared Through Sol-gel Coating on a Glass
In this study, a sol-gel peroxotungstic acid sol was employed to deposit tungsten oxide (WO3) films by the spin-coating technique. In view of smart window applications, electrochromic windows were then designed and fabricated using a thin tungsten oxide film. For this purpose, Glass/ FTO/ WO3/ electrolyte/ FTO/Glass could be of use due to its special structure that consists of an electrochromic...
متن کاملImproving Electrochromic Properties of WO3 Thin Film with Gold Nanoparticle Additive
In this research, WO3 and Au-WO3 thin films were prepared at different temperatures using the sol gel method. The effect of gold nanoparticles (GNPs) on the electrochromic properties of WO3 was also studied. 2.5 nm GNP was synthesized through sodium citrate reduction of gold chloride in an aqueous solution. These films were characterized by XRD, SEM, TEM, and spectrophotometer analyses. The fil...
متن کاملتأثیر ماندگاری محلول بر خواص نوری و الکتروکرومیکی لایههای نازک 3WO برای ساخت پنجرههای هوشمند
This paper proposes a suitable method for increasing effective surface area of electrodeposited WO3 thin films. This is done because effective surface area improves optical and electrochromic properties in smart windows. Therefore, we investigated precursor aging atperoxytungstate precursor (0, 24, 48 and 72 h). Experiments showed by increasing aging time of the precursor solution, larger aggre...
متن کاملSurface Morphology and Sensing Property of NiO-WO3 Thin Films Prepared by Thermal Evaporation
WO3 and NiO-WO3 thin films of various thicknesses were deposited on an Al2O3-Si (alumina-silicon) substrate using high vacuum thermal evaporation. After annealing at 500C for 30 minutes in air, the crystallanity and surface morphology of WO3 and NiO-WO3 thin films were investigated using X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). It is observed that the WO3 thin films were ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 6 شماره
صفحات -
تاریخ انتشار 2016