Self-Tuning Generalized Minimum Variance Control Based on On-Demand Type Feedback Controller
نویسندگان
چکیده
This paper proposes a design method of self-tuning generalized minimum variance control based on ondemand type feedback controller. A controller, such as generalized minimum variance control (GMVC), generalized predictive control (GPC) and so on, can be extended by using coprime factorization. Then new design parameter is introduced into the extended controller, and the parameter can re-design the characteristic of the extended controller, keeping the closedloop characteristic that way. Although strong stability systems can be obtained by the extended controller in order to design safe systems, focusing on feedback signal, the extended controller can adjust the magnitude of the feedback signal. That is, the proposed controller can drive the magnitude of the feedback signal to zero if the control objective was achieved. In other words the feedback signal by the proposed method can appear on demand of achieving the control objective. Therefore this paper proposes on-demand type feedback controller using self-tuning GMVC for plant with uncertainty. A numerical example is shown in order to check the characteristic of the proposed method.
منابع مشابه
New Feed-Forward/Feedback Generalized Minimum Variance Self-tuning Pole-placement Controller
Total Control Effort Abstract—A new Feed-Forward/Feedback Generalized Minimum Variance Pole-placement Controller to incorporate the robustness of classical pole-placement into the flexibility of generalized minimum variance self-tuning controller for Single-Input Single-Output (SISO) has been proposed in this paper. The design, which provides the user with an adaptive mechanism, which ensures t...
متن کاملAn ANOVA Based Analytical Dynamic Matrix Controller Tuning Procedure for FOPDT Models
Dynamic Matrix Control (DMC) is a widely used model predictive controller (MPC) in industrial plants. The successful implementation of DMC in practical applications requires a proper tuning of the controller. The available tuning procedures are mainly based on experience and empirical results. This paper develops an analytical tool for DMC tuning. It is based on the application of Analysis of V...
متن کاملMicrosoft Word - ACODS_2012_11jan2012_rev1
This paper describes the design of a new self-tuning controller to control tip trajectory and tip deflection of a two-link flexible manipulator handling variable payloads based on nonlinear autoregressive with moving average and exogenous input (NARMAX) model. This proposed adaptive controller consists of a multivariate proportional integral and derivative (PID) feedback loop. The gains of the ...
متن کاملSelf-tuning Neuro-fuzzy Generalized Minimum Variance Controller
The development of a Self-Tuning Neuro-Fuzzy Generalized Minimum Variance (GMV) controller is described. It uses fuzzy expert knowledge of the dynamic weightings to meet desired closed-loop stability and performance requirements. The controller is formulated in a polynomial system approach mixed with a Neuro-Fuzzy model and Fuzzy Self-Tuning mechanism. The proposed method is applied to a model ...
متن کاملAdaptive Control of a Spin-Stabilized Spacecraft Using two Reaction Wheels and a 1DoF Gimbaled-Thruster
In impulsive orbital maneuvers, a large disturbance torque is generated by the thrust vector misalignment from the center of mass (C.M). The purpose of this paper is to reject the mentioned disturbance and stabilize the spacecraft attitude, based on the combination of a one degree of freedom (1DoF) gimbaled-thruster, two reaction wheels (RWs) and spin-stabilization. In this paper, the disturban...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- JRM
دوره 28 شماره
صفحات -
تاریخ انتشار 2016