Measuring modeling and realization of amplifiers
ثبت نشده
چکیده
The goal of this work is to arm designers with the necessary insight in the nonlinear behavior of their designs such that they can take the different specifications that are put on the nonlinear behavior correctly into account at every level of their design. The contributions of this work make it possible to achieve this goal. It covers the design at transistor level, the analysis of complete circuits and the high-level modeling of devices to be used in system-level simulations.
منابع مشابه
A Proposal for a New Method of Modeling of the Quantum Dot Semiconductor Optical Amplifiers
With the advancement of nanoscale semiconductor technology,semiconductor optical amplifiers are used to amplify and process all-optical signals. Inthis paper, with the aim of calculating the gain of quantum dot semiconductor opticalamplifier (QD-SOA), two groups of rate equations and the optical signal propagatingequation are used in the active layer of the device. For t...
متن کاملEffects of Non-Ideal Pre-Distorter High Power Amplifiers in WCDMA Using Multi-User Detectors
Wide band code division multiple access (WCDMA) signals, transmitted by the base station high power amplifiers (HPAs), show high peak to average power ratios (PAPR), which results in nonlinear distortions. In this paper, using computer simulations effect of using a predistorted HPA on the symbol error rate (SER) of multi-user detectors in terms of output back-off (OBO) in the transmit power...
متن کاملNon-linear modeling, analysis, design and simulation of a solid state power amplifier based on GaN technology for Ku band microwave application
A new non-linear method for design and analysis of solid state power amplifiers is presented and applied to an aluminum gallium nitride, gallium nitride (AlGaN-GaN) high electron-mobility transistor (HEMTs) on silicon-carbide (SiC) substrate for Ku band (12.4 13.6 GHz) applications. With combining output power of 8 transistors, maximum output power of 46.3 dBm (42.6 W), PAE of 43% and linear ga...
متن کاملSignal Flow Graph Realization of Single-input Five-output Current-mode Universal Biquad Using Current Follower Transconductance Amplifiers
In this paper, a design procedure for the realization of all current-mode biquadratic transfer functions is presented. The synthesis technique is deduced from a signal flow graph representation using current follower transconductance amplifiers (CFTAs). The proposed configuration has single low-impedance input and five high-impedance outputs, and comprises three CFTAs and two grounded capacitor...
متن کاملTHD Analysis in Closed-Loop Analog PWM Class-D Amplifiers
In this paper, we investigate the parameters affecting Total Harmonic Distortion (THD) and Power Supply Rejection Ratio (PSRR) in PWM Class D Amplifiers (CDAs) on the basis of linear models with feedback. From our mathematical analysis, we show that the THD of a PWM Class D amplifier with feedback can be improved by increasing the gain of the integrator through adding another amplifier at the o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007