Bioabsorbable polymer optical waveguides for deep-tissue photomedicine.
نویسندگان
چکیده
Advances in photonics have stimulated significant progress in medicine, with many techniques now in routine clinical use. However, the finite depth of light penetration in tissue is a serious constraint to clinical utility. Here we show implantable light-delivery devices made of bio-derived or biocompatible, and biodegradable polymers. In contrast to conventional optical fibres, which must be removed from the body soon after use, the biodegradable and biocompatible waveguides may be used for long-term light delivery and need not be removed as they are gradually resorbed by the tissue. As proof of concept, we demonstrate this paradigm-shifting approach for photochemical tissue bonding (PTB). Using comb-shaped planar waveguides, we achieve a full thickness (>10 mm) wound closure of porcine skin, which represents ∼ 10-fold extension of the tissue area achieved with conventional PTB. The results point to a new direction in photomedicine for using light in deep tissues.
منابع مشابه
Unified picture of modal loss rates from microwave to optical frequencies in deep-subwavelength metallic structures: A case study with slot waveguides
Articles you may be interested in High efficiency coupling of radio frequency beams from the dual frequency gyrotron with a corrugated waveguide transmission system Rev. Dual cylindrical metallic grating-cladding polymer hollow waveguide for terahertz transmission with low loss Appl. Magnetic metal cladding gives better attenuation in small waveguides operating at high microwave frequencies tha...
متن کاملProperties of the Optical Planar Polymer Waveguides Deposited on Printed Circuit Boards
This paper reports on a technology for realization of an optical planar waveguide layer on duroid substrate and on FR4 fiber reinforced board material printed circuit boards. Waveguide core material was EpoCore polymer and for claddings we used EpoClad polymer. Design of the presented planar waveguides was realized on the bases of modified dispersion equation and was schemed for 633 nm, 964 nm,...
متن کاملPolymer waveguide backplanes for optical sensor interfaces in microfluidics.
A polymer optical backplane capable of generic luminescence detection within microfluidic chips is demonstrated using large core polymer waveguides and vertical couplers. The waveguides are fabricated through a new process combining mechanical machining and vapor polishing with elastomer microtransfer molding. A backplane approach enables general optical integration with planar array microfluid...
متن کاملTitle of Thesis : DIRECT LASER FABRICATION OF DIFFRACTION GRATINGS ON POLYMER THIN FILMS AND WAVEGUIDES
Title of Thesis: DIRECT LASER FABRICATION OF DIFFRACTION GRATINGS ON POLYMER THIN FILMS AND WAVEGUIDES Glenn D Hutchinson, Master of Science, 2005 Thesis Directed By: Professor Chi H. Lee, Department of Electrical and Computer Engineering With the increasing interest in polymer integrated optical devices, techniques for fabrication of efficient polymer diffraction gratings are of critical impor...
متن کاملFlexible, Stable, and Easily Processable Optical Silicones for Low Loss Polymer Waveguides
Photopatternable optical silicone materials have been developed that can be fabricated into flexible polymer waveguides using conventional film processing and photolithography techniques. Waveguides designed for multimode applications have demonstrated loss of 0.05 dB/cm at 850 nm. These waveguides have proven stable in 85% relative humidity and 85 C storage conditions for greater than 2000 ho...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Nature communications
دوره 7 شماره
صفحات -
تاریخ انتشار 2016