Optimization of well placement geothermal reservoirs using artificial intelligence

نویسندگان

  • Serhat Akin
  • Mustafa Versan Kok
  • Irtek Uraz
چکیده

This research proposes a framework for determining the optimum location of an injection well using an inference method, artificial neural networks and a search algorithm to create a search space and locate the global maxima. A complex carbonate geothermal reservoir (Kizildere Geothermal field, Turkey) production history is used to evaluate the proposed framework. Neural networks are used as a tool to replicate the behavior of commercial simulators, by capturing the response of the field given a limited number of parameters such as temperature, pressure, injection location, and injection flow rate. A study on different network designs indicates that a combination of neural network and an optimization algorithm (explicit search with variable stepping) to capture local maxima can be used to locate a region or a location for optimum well placement. Results also indicate shortcomings and possible pitfalls associated with the approach. With the provided flexibility of the proposed workflow, it is possible to incorporate various parameters including injection flow rate, temperature, and location. For the field of study, optimum injection well location is found to be in the southeastern part of the field. Specific locations resulting from the workflow indicated a consistent search space, having higher values in that particular region. When studied with fixed flow rates (2500 and 4911 m/day), a search run through the whole field located two locations which are in the very same region resulting in consistent predictions. Further study carried out by incorporating effect of different flow rates indicates that the algorithm can be run in a particular region of interest and different flow rates may yield different locations. This analysis resulted with a new location in the same region and an optimum injection rate of 4000 m/day). It is observed that use of neural network, as a proxy to numerical simulator is viable for narrowing down or locating the area of interest for optimum well placement. & 2010 Elsevier Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Integrated Well Placement and Completion Optimization using Heuristic Algorithms: A Case Study of an Iranian Carbonate Formation

Determination of optimum location for drilling a new well not only requires engineering judgments but also consumes excessive computational time. Additionally, availability of many physical constraints such as the well length, trajectory, and completion type and the numerous affecting parameters including, well type, well numbers, well-control variables prompt that the optimization approaches b...

متن کامل

The Optimal Placement of Distributed Generation (DG) to Improve the Voltage Profile and Reduce Losses in Radial Distribution Networks Using PSO

Voltage profile and losses are important factors in a distribution network in which there arevariety of ways to improve them. In this paper, distributed generation (DG) is used as a solutionto improve the above characteristics. Backward/Forward Sweep load flow algorithm is used dueto the inefficiency of usual load flow algorithms because of high R/X ratio and their lack ofconvergence in distrib...

متن کامل

Optimization of Reinjection in Geothermal Reservoirs

Re-injection of produced geothermal water for pressure support is a common practice in geothermal field management. The location selection of the reinjection well and the rate of injection is a challenging subject for geothermal reservoir engineers. The goal of optimization for this type of problem is usually to find one or more combinations of geothermal re-injection well locations that will m...

متن کامل

Optimization of Re-injection in Low Temperature Geothermal Reservoirs Using Neural Network and Kriging Proxies

Re-injection of produced geothermal water for pressure support is a common practice in geothermal field management. The location selection of the reinjection well and the rate of injection is a challenging subject for geothermal reservoir engineers. The goal of optimization for this type of problem is usually to find one or more combinations of geothermal re-injection well locations that will m...

متن کامل

Multi-objective Based Optimization Using Tap Setting Transformer, DG and Capacitor Placement in Distribution Networks

In this article, a multi-objective function for placement of Distributed Generation (DG) and capacitors with thetap setting of Under Load Tap Changer (ULTC) Transformer is introduced. Most of the recent articles have paidless attention to DG, capacitor placement and ULTC effects in the distribution network simultaneously. Insimulations, a comparison between different modes was carried out with,...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Computers & Geosciences

دوره 36  شماره 

صفحات  -

تاریخ انتشار 2010