An overview of polymer latex film formation and properties.
نویسندگان
چکیده
The literature on polymer latex film formation has grown enormously in recent times--driven by the need to find alternatives for solvent-based systems with their adverse environmental impacts. Although greater insight has been shown by the use of modern instrumental techniques such as small angle neutron scattering, direct non-radiative energy transfer and atomic force microscopy, the actual mechanisms involved in deforming spherical particles into void-free films are still the subject of controversy and debate. Surfactant-free homopolymer model colloid latices, favoured in academic studies, together with latices containing surfactants whose redistribution can influence film properties, and the more complex copolymer, blended, core-shell and pigmented systems needed to satisfy a full range of film properties are all considered.
منابع مشابه
Fluorescently Labelled Latex Particles to Monitor Film Formation
Latex film formation has been of commercial importance for many years, particularly in the paint industry. Since the 1960s latex paints have largely replaced oil-based paints, which have been known to contain hazardous amounts of lead. The film formation process begins with latex particles in an aqueous dispersion. As the water evaporates, the particles come into close contact and start deformi...
متن کاملThe Fine Dispersion of Functionalized Carbon Nanotubes in Acrylic Latex Coatings
Nanocomposites of a polymer and carbon nanotubes exhibit high electrical and thermal conductivity and enhanced mechanical properties in comparison to the polymer alone. Film formation from latex dispersions is an ideal way to create nanocomposite coatings with the advantages of solvent-free processing and a high uniformity of dispersion. It is shown here that carbon nanotubes functionalised wit...
متن کاملUse of a Routh-Russel deformation map to achieve film formation of a latex with a high glass transition temperature.
In the film formation of latex, particle deformation can occur by processes of wet sintering, dry sintering, or capillary action. When latex films dry nonuniformly and when particles deform and coalesce while the film is still wet, a detrimental skin layer will develop at the film surface. In their process model, Routh and Russel proposed that the operative particle deformation mechanism can be...
متن کاملSkin Development during the Film Formation of Waterborne Acrylic Pressure-Sensitive Adhesives containing Tackifying Resin
Tackifying resins (TR) are often used to improve the adhesive properties of waterborne pressure-sensitive adhesives (PSAs) derived from latex dispersions. There is a large gap in the understanding of how, and to what extent, the film formation mechanism of PSAs is altered by the addition of TR. Herein, magnetic resonance profiling experiments show that the addition of TR to an acrylic latex cre...
متن کاملSintering Technique in Pharmaceutical Sciences: a Brief Review
In the pharmaceutical science, sintering has been described as the mechanism for the strengthening of the mechanical properties of consolidated pharmaceutical powders at elevated temperatures, for solid-bond formation during tablet compression, and for thermal curing of polymer-latex film coatings. The concept of sintering was applied in the investigation of the effect of heating on the mechani...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Advances in colloid and interface science
دوره 86 3 شماره
صفحات -
تاریخ انتشار 2000