Robust Control for Output Voltage Across Load of DC-DC Converter Matching with Remote Sensing
نویسنده
چکیده
If the lines which connect the output terminal of DC-DC converter and the load are long, the voltage actually across load will be changed largely to produce the voltage drops by the impedances of the lines. Then, the terminal which senses the voltage across load is prepared apart from the output terminal of DC-DC converter, and it leads to the load, and the voltage across load is adjusted so that it is not changed largely. This method is called remote sensing. When the lines becomes long, the usual method of adjusting the voltage across load cannot suppress enough the change of it. In this paper, the robust digital controller for suppressing the change of the voltage across load is proposed. Experimental studies using DSP demonstrate that this type of digital controller is effective to suppress it.
منابع مشابه
Direct Exact Feedback Linearization based control of the of the Output Voltage in the Minimum phase DC-DC Choppers
In this paper, a novel approach for control of the DC-DC buck converter in high-power and low-voltage applications is proposed. Designed method is developed according to state feedback linearization based controller , which is able to stabilize output voltage in a wide range of operation. It is clear that in high-power applications, parasitic elements of the converter may become comparable with...
متن کاملDevelopment of Average Model for Control of a Full Bridge PWM DC-DC Converter
This paper presents a detailed small-signal and transient analysis of a full bridge PWM DC-DC converter designed for high voltage, high power applications using an average model. The derived model is implemented in a typical system and used to produce the small-signal and transient characteristics of the converter. Results obtained in the analysis of the high voltage and high power design examp...
متن کاملA High Efficiency Low-Voltage Soft Switching DC–DC Converter for Portable Applications
This paper presents a novel control method to improve the efficiency of low-voltage DC-DC converters at light loads. Pulse Width Modulation (PWM) converters have poor efficiencies at light loads, while pulse frequency modulation (PFM) control is more efficient for the same cases. Switching losses constitute a major portion of the total power loss at light loads. To decrease the switching losses...
متن کاملDesign and Implementation of a Constant Frequency Sliding Mode Controller for a Luo Converter
In this study, a robust controller for voltage regulation of the POESLL converter worked in continuous conduction mode is presented. POESLL converter is a DC/DC converter with a high voltage gain. DC/DC converters are used in telecommunication systems, power sources and industrial applications. Owing to the switching operation, the structure of the POESLL converter is highly non-linear. In addi...
متن کاملVoltage Control and Load Sharing in a DC Islanded Microgrid Based on Disturbance Observer
Increasing DC loads along with DC nature of distributed energy resources (DERs) raises interest to DC microgrids. Conventional droop/non-droop power-sharing in microgrids suffers from load dependent voltage deviation, slow transient response, and requires the parameters of the loads, system and DERs connection status. In this paper, a new nonlinear decentralized back-stepping control strategy f...
متن کامل