Friction Identification and Compensation on Nanometer Scale
نویسنده
چکیده
This work concerns the modelling and experimental verification of the highly nonlinear friction behavior in positioning on the nanometer scale. The main goal of this work is to adjust and identify a simple dynamic friction model which allows a model-based estimation of the friction force in combination with the system inertia against displacement. Experiments in the pre-sliding and sliding friction regimes are conducted on an experimental setup. A hybrid two-stage parameter estimation algorithm is used to fit the model parameters based on the experimental data. Finally, the identified friction model is utilized as a model-based feedforward controller combined with a classical feedback controller to compensate the nonlinear friction force and reduce tracking errors.
منابع مشابه
Friction Modelling of a Linear High-precision Actuator
For control applications aiming accurate positioning and path tracking friction modelling and compensation can be very important, especially when working with small displacements as usual in nano technologies. The paper at hand describes friction identification and friction model application for a linear high-precision ball bearing guide driven by a voice coil actuator and using high-resolution...
متن کاملFriction Compensation for Dynamic and Static Models Using Nonlinear Adaptive Optimal Technique
Friction is a nonlinear phenomenon which has destructive effects on performance of control systems. To obviate these effects, friction compensation is an effectual solution. In this paper, an adaptive technique is proposed in order to eliminate limit cycles as one of the undesired behaviors due to presence of friction in control systems which happen frequently. The proposed approach works for n...
متن کاملDesign and Nanometer Positioning of a Low Friction Pneumatic Cylinder Embedded with Aerostatic Bearings
In the paper, a low friction pneumatic cylinder and a sliding table, and both of them are embedded with aerostatic bearings are designed. A low friction pneumatic table is constructed by combining the pneumatic cylinder and the sliding table. The characteristics for the friction force versus velocity of the pneumatic cylinder and the pneumatic table are measured. Moreover, a hybrid self-tuning ...
متن کاملFriction Identification and Compensation in a Dc Motor
Friction modeling and identification is a prerequisite for the accurate control of electromechanical systems. This paper considers the identification and control of friction in a high load torque DC motor to the end of achieving accurate tracking. Model-based friction compensation in the feedforward part of the controller is considered. For this purpose, friction model structures ranging from t...
متن کاملIdentification and Model-based Compensation of Striebeck Friction1
The paper deals with the measurement, identification and compensation of low velocity friction in positioning systems. The introduced algorithms are based on a linearized friction model, which can easily be introduced in tracking control algorithms. The developed friction measurement and compensation methods can be implemented in simple industrial controller architectures, such as microcontroll...
متن کامل