On the Frictional Contact in Crack Analysis
نویسنده
چکیده
Abstract-Following the idea of Bowie and Freese we consider a crack in a field of pure bending. The crack is closed over part of its extent, and the two crack faces in contact are allowed to slip under frictional constraints. The solution is constructed under the assumption that the applied loading is monotonically increased. It is discovered, however, that it is possible to analyze unloading by suitably superposing the present solution and that of Bowie and Freese.
منابع مشابه
System identification of a beam with frictional contact
The nonlinear system becomes an area with numerous investigations over the past decades. The conventional modal analysis could not be applied on nonlinear continuous system which makes it impossible to construct the reduced order models and obtain system response based on limited number of measurement points. Nonlinear normal modes provide a useful tool for extending modal analysis to nonlinea...
متن کاملMULTI FRACTURE/DELAMINATION ANALYSIS OF COMPOSITES SUBJECTED TO IMPACT LOADINGS
A combined finite/ discrete element method is presented for modelling of composite specimens subjected to dynamic/impact loadings. The main task is set on developing an algorithm for simulation of potential bonding and debonding/delamination phenomena during impact or general dynamic loading conditions. In addition, full fracture analysis can also be performed. The proposed approach adopts a ge...
متن کاملSymmetric-Galerkin BEM simulation of fracture with frictional contact
A symmetric-Galerkin boundary element framework for fracture analysis with frictional contact (crack friction) on the crack surfaces is presented. The algorithm employs a continuous interpolation on the crack surface (utilizing quadratic boundary elements) and enables the determination of two important quantities for the problem, namely the local normal tractions and sliding displacements on th...
متن کاملNumerical Formulation on Crack Closing Effect In Buckling Analysis of Edge-Cracked Columns
In this paper, buckling of simply supported column with an edge crack is investigated numerically and analytically. Four different scenarios of damage severities are applied to a column, open crack assumption and the effect of closing crack in stability of the column which depends on position and size of cracks, are numerically compared. Crack surfaces contact is modeled with GAP element using ...
متن کاملX-FEM for Abaqus (XFA) Toolkit for Automated Crack Onset and Growth Simulations
A software tool for automated crack onset and growth simulations based on the eXtended Finite Element Method (X-FEM) has been developed. For the first time, this tool is able to simulate arbitrary crack growth and composite delamination without remeshing. The automated tool is integrated with Abaqus/Standard and Abaqus/CAE via the customization interfaces. It seamlessly works with the Commercia...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002