Analysis on Calculated Length for Buckling Stability of Steel Pipe Pile Based on Energy Method
نویسندگان
چکیده
Abstract: According to the Winkler assumption, the form of the pile constraint could be simplified as bottom fixing and top free. Considering the influence from resistance of soil around pile, the equations on calculated length for buckling stability of steel pipe pile when the portions along the pile length were constrained in the uniform foundation and the layered foundation were respectively derived based on energy method and variational principles. And the application of the formulas was explained through examples. The equations are successfully applied in similar projects.
منابع مشابه
on the Elastic Stability of Sleeve Stiffened Hollow Columns; Focusing on Determination of Optimal Design Curves (TECHNICAL NOTE)
The stability analysis of sleeve stiffened pin-ended slender hollow columns of pipe or box section is performed in the present study. This is accomplished by using energy method, employing three terms in the assumed approximate deflection function. The lengthy and tedious algebraic manipulations involved in solving the relevant eigenvalue problem, necessitates employing the "MATHEMATICA" softwa...
متن کاملModification of the Euler load for the stiffened compressive members and determination of the optimal stiffening for the maximum buckling load
The potential of buckling in compressive members has been considered as a disadvantage when using steel members in the construction industry. In spite of the progress made in this regard, buckling is still considered as a challenge in the analysis and design of compressive steel structural members. Such a challenging phenomenon can be controlled by strengthening of compressive members. Stiffene...
متن کاملExperimental Compression Tests on the Stability of Structural Steel Tabular Props
Experimental studies are presented in this paper on the stability of structural steel props. Three full-scale prop specimens with various geometric properties were constructed and tested statically and elastically in the lab, in order to obtain the elastic strength of the props. The total unsupported length is 6 m for the three props. The outer and inner diameters are 150 mm and 140 mm, 138 mm ...
متن کاملResearch on Pressed Pile Test and Finite Element Analysis of Large-diameter Steel Pipe Pile of Zhanjiang Port
In order to study pressed pile test and ultimate bearing capacity character of large-diameter steel pipe pile, based on two high-piled wharfs of Zhanjiang Port, pressed pile test and numerical simulation of three large-diameter steel pipe piles are analyzed in this paper. Anchored pile method is used to pressed pile test, and the curves of Q-s and ultimate bearing capacity are attained. Then th...
متن کاملElastic buckling finite strip analysis of the AISC sections database and proposed local plate buckling coefficients
The objective of this paper is to provide analytical expressions for the elastic cross-section local buckling stress, including element interaction, of hot-rolled steel structural shapes. The crosssection local buckling stress is determined by finite strip analysis. Local stability of each crosssection is considered in axial compression, as well as positive and negative bending about the major ...
متن کامل