Research Update: Behind the high efficiency of hybrid perovskite solar cells
نویسندگان
چکیده
Research Update: Behind the high efficiency of hybrid perovskite solar cells Azhar Fakharuddin,1,2,a Francesca De Rossi,3,a Trystan M. Watson,3 Lukas Schmidt-Mende,1 and Rajan Jose4,a 1Department of Physics, University of Konstanz, D-78457 Konstanz, Germany 2School of Chemical and Materials Engineering, National University of Sciences and Technology, H-12, Islamabad, Pakistan 3College of Engineering, SPECIFIC – Swansea University, Bay Campus, SA1 8EN Swansea, United Kingdom 4Nanostructured Renewable Energy Materials Laboratory, Universiti Malaysia Pahang, 26300 Kuantan, Malaysia
منابع مشابه
High efficient Perovskite solar cells base on Niobium Doped TiO2 as a Buffer Layer
Here, the effect of lightly Niobium doped TiO2 layer on the performance of perovskite solar cells has been studied by using solar cell capacitance simulator (SCAPS). N addition, the effects of Niobium concentration, buffer film thickness and operating temperature on the performance of the perovskite solar cell are investigated. For doping level of 3.0 mol% into the TiO2 layer, cell efficiency o...
متن کاملNovel application of hybrid Perovskite materials in grid-connected photo-voltaic cells
In this paper, the novel application of organic/inorganic perovskite hybrid materials isproposed for grid-connected Photo-voltaic (PV) cells. The perovskite hybrid cells attracted a lot of interest due to their potential in combining advantages of both components. Looking to the future, there is no doubt that these new generations of hybrid materials, born from the very fruitful activitie...
متن کاملPlanar perovskite solar cells using fullerene C70 as electron selective transport layer
Owing amongst other to its high electron mobility, fullerene C70, has been widely used as an electron transporting layer in organic solar cells. In this research, we report the use of C70 thin films as electron transport layers of planar perovskite solar cells (PSCs) using a conventional device structure. The thickness of the C70 layer has been optimized to achieve the best efficiency of 12%. I...
متن کاملInvestigation of the Effect of Band Offset and Mobility of Organic/Inorganic HTM Layers on the Performance of Perovskite Solar Cells
Abstract: Perovskite solar cells have become an attractive subject in the solar energydevice area. During ten years of development, the energy conversion efficiency has beenimproved from 2.2% to more than 22%, and it still has a very good potential for furtherenhancement. In this paper, a numerical model of the perovskite solar cell with thestructure of glass/ FTO/ TiO2/...
متن کاملA High-Efficiency Si Nanowire Array/Perovskite Hybrid Solar Cell
A low-cost Si nanowire array/perovskite hybrid solar cell is proposed and simulated. The solar cell consists of a Si p-i-n nanowire array filled with CH3NH3PbI3, in which both the nanowires and perovskite absorb the incident light while the nanowires act as the channels for transporting photo-generated electrons and holes. The hybrid structure has a high absorption efficiency in a broad wavelen...
متن کامل