Stress intensity factors computation for bending plates with extended finite element method
نویسندگان
چکیده
To cite this version: Lasry, Jérémie and Renard, Yves and Salaün, Michel Stress intensity factors computation for bending plates with extended finite element method. (2012) International Journal for Numerical Methods in Engineering, vol. 91 (n° 9). pp. 909-928. ISSN 0029-5981 Open Archive Toulouse Archive Ouverte (OATAO) OATAO is an open access repository that collects the work of Toulouse researchers and makes it freely available over the web where possible.
منابع مشابه
Williams meets von Karman: Mode coupling and nonlinearity in the fracture of thin plates
The stress field near the tip of a crack in a plate subjected to membrane and bending loads and undergoing large deflections, is investigated by performing an asymptotic analysis in the context of von Karman plate theory. It is demonstrated that the character of the near tip fields is identical to those of the linear plate theory. However, the determination of the crack tip stress intensity fac...
متن کاملBending Analysis of Rectangular FGM Plates based on the Extended Kantorovich Method
Bending analysis of FGM plates under uniform and sinusoidal loaded result in forth order partial differential equation. In this paper the analytical solution is based on the extended Kantorovich iterative procedure. The differential equations for the iterative procedure is derived using the Galerkin method. The solution was develope based on the classical plate’s theory (CLPT). The reliability ...
متن کاملThermoelastic Fracture Parameters for Anisotropic Plates
This paper deals with the determination of the effect of varying material properties on the value of the stress intensity factors, KI and KII, for anisotropic plates containing cracks and subjected to a temperature change. Problems involving cracks and body forces, as well as thermal loads are analysed. The quadratic isoperimetric element formulation is utilized, and SIFs may be directly obtain...
متن کاملمقایسه روش آنالیز ایزوژئومتریک و روش اجزای محدود توسعه یافته در مدلسازی ناپیوستگی و محاسبه فاکتور شدت تنش
This study shows how to create different types of crack and discontinuities by using isogeometric analysis approach (IGA) and extended finite element method (XFEM). In this contribution, two unique features of isogeometric analysis approach are utilized to create discontinuous zones. Discontinuities consist of crack and cohesive zone. In isogeometric analysis method NURBS is used to approximate...
متن کاملDUAL BOUNDARY ELEMENT ANALYSIS OF CRACKED PLATES
The dual boundary element method is formulated for the analysis of linear elastic cracked plates. The dual boundary integral equations of the method are the displacement and the traction equations. When these equations are simultaneously applied along the crack boundaries, general crack problems can be solved in a single-region formulation, with both crack boundaries discretized with discontinu...
متن کامل