Preparation of zirconium and hafnium metals by bomb reduction of their fluorides
نویسندگان
چکیده
A bomb process for preparing zirconium and hafnium metals with calcium by the reduction of their tetrafluorides is described. A detailed method of preparing the high purity tetrafluorides is presented and the purity and physical properties of the metals obtained are discussed.
منابع مشابه
Thermodynamic and Kinetic Studies for a Refractory Materials Program
Work during 1963 is reported and the work from mid-1960 reviewed on a comprehensive program of thermodynamic and kinetic studies necessary to the theoretical consideration to temperatures of 3000K of the reactions of the zirconium and hafnium carbides and borides with oxygenor halogen-containing atmospheres. ; • Work presented includes: preparation of borides and carbides; low ', temperature he...
متن کاملMelting Point Determination
An improved technique is described for the accurate determination of melting points of metals in the temperature range 1500° to 2500°C. The improvements consist of gradient heating and refinements in cavity preparation to obtain true black-body conditions. The melting point of hafnium, as determined by this method, is set a t 22220-+30°C. This is over 200°C higher than one of the values reporte...
متن کاملGroup (IV) Metallocene Complexes with Bulky ω-aryloxyalkyl-Substituted Indenyl Ligands as Catalyst Precursors for Homogeneous Ethylene Polymerization
A series of seven new complexes of zirconium and hafnium with bulky ω-aryloxyalkyl substituted indenyl ligands were synthesized and characterized by NMR spectroscopy and elemental analysis. These complexes were activated with methylaluminoxane and tested for homogeneous ethylene polymerization. The zirconium catalysts showed higher activities than their hafnium an...
متن کاملDevelopment of Passivated Pyrophoric Metal Powders (hafnium and Zirconium) with Reduced Electrostatic Discharge (esd) Sensitivity
High-density metals such as hafnium and zirconium are of interest to the propellant, explosive, and pyrotechnic industry due to their high oxidation enthalpies; however, these metal fuels suffer from electrostatic discharge (ESD) complications creating safety concerns. Previous attempts to passivate these powders have failed due to abrasion of the protective coatings. Two novel methods for dese...
متن کاملTritium production resulting from deuteration of different metals and alloys
Previous experiments have shown that tritium is produced in deuterated titanium. To better define the phenomenon a series of tests have been performed using various metals and alloys and different deuterating conditions. Sheets and shavings of titanium, zirconium, hafnium, tantalum, Zircaloy 2 and Ti-Zr 50% alloy have been tested. A statistical analysis of the tritium production shows that sign...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016